EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Feed Mass, Reactor Temperature, and Time on the Yield of Waste Polypropylene Pyrolysis Oil Produced via a Fixed-Bed Reactor

Saša Papuga iD, Jelena Savković, Milica Djurdjevic iD, Stefano Vecchio Ciprioti iD

Polymers · 07.05.2024 · 16 (10) · 1302

DOI: 10.3390/polym16101302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 07.05.2024. Verfasst von Saša Papuga und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Technology, University of Banja Luka, 78000 Banja Luka, Bosnia and Herzegovina. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the results of investigations into the pyrolysis of waste polypropylene in a laboratory fixed-bed batch reactor. The experiments were designed and verified in such a way as to allow the application of the response surface methodology (RSM) in the development of an empirical mathematical model that quantifies the impacts mentioned above. The influence of the mass of the raw material (50, 100, and 150 g) together with the reactor temperature (450, 475, and 500 °C) and the reaction time (45, 50 and 75 min) was examined. It has been shown that the mass of the raw material, i.e., the filling volume of the reactor, has a significant influence on the pyrolysis oil yield. This influence exceeds the influence of reactor temperature and reaction time. This was explained by observing the temperature change inside the reactor at three different spots at the bottom, middle, and top of the reactor. The recorded temperature diagrams show that, with greater masses of feedstock, local overheating occurs in the middle part of the reactor, which leads to the overcracking of volatile products and, from there, to an increased formation of non-condensable gases, i.e., a reduced yield of pyrolytic oil.

Schlagwörter

Stichwörter der Autor:innen

fixed-bed reactorplastic wastepolypropylenepyrolysisresponse surface methodology

Autor:innen und Institutionen

  • Faculty of Technology, University of Banja Luka, 78000 Banja Luka, Bosnia and Herzegovina.
  • Faculty of Mechanical Engineering, University of Banja Luka, 78000 Banja Luka, Bosnia and Herzegovina.
  • Department of Basic and Applied Science for Engineering, Sapienza University of Rome, I-00161 Rome, Italy.

ORCID-Profile: Saša Papuga, Milica Djurdjevic, Stefano Vecchio Ciprioti

Zitieren

APA

Papuga, S., Savković, J., Djurdjevic, M., & Ciprioti, S. V. (2024). Effect of Feed Mass, Reactor Temperature, and Time on the Yield of Waste Polypropylene Pyrolysis Oil Produced via a Fixed-Bed Reactor. Polymers, 16(10), 1302. https://doi.org/10.3390/polym16101302

Vancouver

Papuga S, Savković J, Djurdjevic M, Ciprioti SV. Effect of Feed Mass, Reactor Temperature, and Time on the Yield of Waste Polypropylene Pyrolysis Oil Produced via a Fixed-Bed Reactor. Polymers. 2024;16(10):1302. doi:10.3390/polym16101302

BibTeX
@article{Papuga2024,
  author = {Papuga, Saša and Savković, Jelena and Djurdjevic, Milica and Ciprioti, Stefano Vecchio},
  title = {Effect of Feed Mass, Reactor Temperature, and Time on the Yield of Waste Polypropylene Pyrolysis Oil Produced via a Fixed-Bed Reactor},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {10},
  pages = {1302},
  doi = {10.3390/polym16101302}
}
Kostenlos starten →