The Synergistic Effect of Carbon Black/Carbon Nanotube Hybrid Fillers on the Physical and Mechanical Properties of EPDM Composites after Exposure to High-Pressure Hydrogen Gas
Polymers · 11.04.2024 · 16 (8) · 1065
DOI: 10.3390/polym16081065 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 11.04.2024. Verfasst von Hyunmin Kang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Elastic Material Research Group, Korea Institute of Materials Convergence Technology, Busan 47154, Republic of Korea. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Research Institute of Standards and Science, Ministry of Trade, Industry and Energy, Development of Reliability Measurement Technology for Hydrogen Refueling Station, funded by Korea Research Institute of Standards and Science.
Abstract (Originalsprache)
This study investigated the synergistic effect of carbon black/multi-wall carbon nanotube (CB/MWCNT) hybrid fillers on the physical and mechanical properties of Ethylene propylene diene rubber (EPDM) composites after exposure to high-pressure hydrogen gas. The EPDM/CB/CNT hybrid composites were prepared by using the EPDM/MWCNT master batch (MB) with 10 phr CNTs to enhance the dispersion of CNTs in hybrid composites. The investigation included a detailed analysis of cure characteristics, crosslink density, Payne effect, mechanical properties, and hydrogen permeation properties. After exposure to 96.3 MPa hydrogen gas, the hydrogen uptake and the change in volume and mechanical properties of the composites were assessed. We found that as the MWCNT volume fraction in fillers increased, the crosslink density, filler–filler interaction, and modulus of hybrid composites increased. The hydrogen uptake and the solubility of the composites decreased with an increasing MWCNT volume fraction in fillers. Moreover, after exposure to hydrogen gas, the change in volume and mechanical properties exhibited a diminishing trend with a higher MWCNT volume fraction. We conclude that the hybridization of CB and CNTs formed strong filler–filler networks in hybrid composites, consequently reinforcing the EPDM composites and enhancing the barrier properties of hydrogen gas.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Elastic Material Research Group, Korea Institute of Materials Convergence Technology, Busan 47154, Republic of Korea.
- Hydrogen Energy Group, Korea Research Institute of Standards and Science, Daejeon 34113, Republic of Korea.
ORCID-Profile: Nakkwan Chung, Jaekap Jung, Jihun Lee, Yewon Kim, Myungchan Choi
Förderung
- Korea Research Institute of Standards and Science
- Ministry of Trade, Industry and Energy
- Development of Reliability Measurement Technology for Hydrogen Refueling Station, funded by Korea Research Institute of Standards and Science
- Technology Innovation Program (Development of Material Component Technology)
Zitieren
APA
Kang, H., Bae, J., Lee, J., Yun, Y., Jeon, S., Chung, N., Jung, J., Baek, U., Lee, J., Kim, Y., & Choi, M. (2024). The Synergistic Effect of Carbon Black/Carbon Nanotube Hybrid Fillers on the Physical and Mechanical Properties of EPDM Composites after Exposure to High-Pressure Hydrogen Gas. Polymers, 16(8), 1065. https://doi.org/10.3390/polym16081065
Vancouver
Kang H, Bae J, Lee J, Yun Y, Jeon S, Chung N, et al. The Synergistic Effect of Carbon Black/Carbon Nanotube Hybrid Fillers on the Physical and Mechanical Properties of EPDM Composites after Exposure to High-Pressure Hydrogen Gas. Polymers. 2024;16(8):1065. doi:10.3390/polym16081065
BibTeX
@article{Kang2024,
author = {Kang, Hyunmin and Bae, Jongwoo and Lee, Jinhyok and Yun, Yumi and Jeon, Sangkoo and Chung, Nakkwan and Jung, Jaekap and Baek, Unbong and Lee, Jihun and Kim, Yewon and Choi, Myungchan},
title = {The Synergistic Effect of Carbon Black/Carbon Nanotube Hybrid Fillers on the Physical and Mechanical Properties of EPDM Composites after Exposure to High-Pressure Hydrogen Gas},
journal = {Polymers},
year = {2024},
volume = {16},
number = {8},
pages = {1065},
doi = {10.3390/polym16081065}
}
EUVIMED