EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic Effects of Hybrid Single‐Walled Carbon Nanotube/Carbon Black Fillers in 3D‐Printable Polyamide 6 Nanocomposites: Balancing Electrical Conductivity and Mechanical Performance

Müslüm Kaplan

Polymer Engineering & Science · 2026-01 · 66 (1) · 364-377

DOI: 10.1002/pen.70217 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 28.10.2025. Verfasst von Müslüm Kaplan. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conductive polymer nanocomposites for additive manufacturing face a persistent trade‐off, as achieving electrical conductivity requires filler loadings that impair processability and mechanical integrity. While PA6 provides superior thermal and mechanical properties compared to PLA and ABS, conductive PA6 systems remain severely understudied. This study addresses the gap by systematically investigating asymmetric SWCNT/CB hybrid ratios (1:3) in PA6 matrices. Compositions spanning 0.25–1 wt% SWCNT and 1.5–3 wt% CB were characterized, revealing that asymmetric hybrids significantly outperform both single‐filler and balanced hybrid systems. The optimized PA6/1% SWCNT/3% CB composite achieved 80 Ω cm resistivity in compression‐molded samples and 7 × 10 6 Ω cm in 3D‐printed parts, representing a 2.4‐fold improvement over single‐filler systems and nearly two orders of magnitude over balanced hybrids, while maintaining melt viscosities suitable for printing (≤ 5 × 10 4 Pa s at 270°C). Improved conductivity was attributed to geometric complementarity between high‐aspect‐ratio SWCNTs and spherical CB particles, enabling efficient interparticle bridging. Mechanical testing revealed trade‐offs: intermediate loadings (0.5% SWCNT/1.5% CB) enhanced tensile strength by 60% (37 MPa), whereas electrically optimized formulations sacrificed strength (14 MPa). Processing effects increased resistivity by two orders of magnitude in 3D‐printed specimens, quantifying layer‐by‐layer deposition impacts for PA6 hybrids. These findings establish structure–property–processing relationships critical for advancing PA6‐based conductive composites in additive manufacturing.

Zitieren

APA

Kaplan, M. (2026). Synergistic Effects of Hybrid Single‐Walled Carbon Nanotube/Carbon Black Fillers in 3D‐Printable Polyamide 6 Nanocomposites: Balancing Electrical Conductivity and Mechanical Performance. Polymer Engineering & Science, 66(1), 364-377. https://doi.org/10.1002/pen.70217

Vancouver

Kaplan M. Synergistic Effects of Hybrid Single‐Walled Carbon Nanotube/Carbon Black Fillers in 3D‐Printable Polyamide 6 Nanocomposites: Balancing Electrical Conductivity and Mechanical Performance. Polymer Engineering & Science. 2026;66(1):364-377. doi:10.1002/pen.70217

BibTeX
@article{Kaplan2026,
  author = {Kaplan, Müslüm},
  title = {Synergistic Effects of Hybrid Single‐Walled Carbon Nanotube/Carbon Black Fillers in 3D‐Printable Polyamide 6 Nanocomposites: Balancing Electrical Conductivity and Mechanical Performance},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {1},
  pages = {364--377},
  doi = {10.1002/pen.70217}
}
Kostenlos starten →