EUVIMEDEUVIMED entdecken
Crossref

Effect of single and hybrid multiwalled carbon nanotube and carbon black fillers on ethylene-butene copolymer composites for potential sensor applications

Rajesh Theravalappil, Suhail Hyder Vattathurvalappil, Mohammed Alshammari, Shahina Riaz, Mansour Albareeki, Mostafizur Rahaman

Journal of Composite Materials · 2025-05 · 59 (11) · 1387-1397

DOI: 10.1177/00219983241312487 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 06.01.2025. Verfasst von Rajesh Theravalappil und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 58 Literaturangaben. Gefördert von: King Fahd University of Petroleum & Minerals.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyolefin elastomers are widely used for engineering applications due to their balance of toughness, hardness, and strength. However, there is a need to enhance their mechanical and conductivity properties by adding more reinforcements. In this study, ethylene-butene copolymer (EBC) with a 14 mol% butene content was investigated for its potential application in sensors using multi-walled carbon nanotubes (MWCNT) and carbon black (CB) as reinforcements. The study explored the effect of these fillers on the mechanical characteristics and electrical conductivity of the EBC composites, which showed higher strength and modulus. Further, 0.5 wt% of CB reinforcement showed the best tensile properties started to decline with further addition of reinforcements. It was also noted that only a 10% increment was observed in the shore-A hardness of composites even with the highest loading level of fillers, which shows that there is not much compromise in hardness, making these composites suitable candidates for stretchable sensors. This study also concluded that hybrid particle morphology (mixture of MWCNT & CB) has a strong influence on augmenting electrical conductivity. Since these composites possess considerably good softness even at high filler loadings, they can be considered as potential candidates for strain or pressure sensors or in wearable electronics. Overall, the strategy used in this work can be employed to study the effect of reinforcement morphology in other polymer combinations to enhance the conductivity and mechanical properties.

Förderung

  • King Fahd University of Petroleum & Minerals

Zitieren

APA

Theravalappil, R., Vattathurvalappil, S. H., Alshammari, M., Riaz, S., Albareeki, M., & Rahaman, M. (2025). Effect of single and hybrid multiwalled carbon nanotube and carbon black fillers on ethylene-butene copolymer composites for potential sensor applications. Journal of Composite Materials, 59(11), 1387-1397. https://doi.org/10.1177/00219983241312487

Vancouver

Theravalappil R, Vattathurvalappil SH, Alshammari M, Riaz S, Albareeki M, Rahaman M. Effect of single and hybrid multiwalled carbon nanotube and carbon black fillers on ethylene-butene copolymer composites for potential sensor applications. Journal of Composite Materials. 2025;59(11):1387-1397. doi:10.1177/00219983241312487

BibTeX
@article{Theravalappil2025,
  author = {Theravalappil, Rajesh and Vattathurvalappil, Suhail Hyder and Alshammari, Mohammed and Riaz, Shahina and Albareeki, Mansour and Rahaman, Mostafizur},
  title = {Effect of single and hybrid multiwalled carbon nanotube and carbon black fillers on ethylene-butene copolymer composites for potential sensor applications},
  journal = {Journal of Composite Materials},
  year = {2025},
  volume = {59},
  number = {11},
  pages = {1387--1397},
  doi = {10.1177/00219983241312487}
}
Kostenlos starten →