EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Temperature and Humidity Coupling on the Ageing Failure of Carbon Fiber Composite/Titanium Bonded Joints

Han Peng iD, Tai Zhou, Linjian Shangguan, Ruixue Cheng iD

Polymers · 30.03.2024 · 16 (7) · 952

DOI: 10.3390/polym16070952 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.03.2024. Verfasst von Han Peng und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, North China University of Water Resources and Electric Power, Zhengzhou 450045, China. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan province of university technology innovation team, Henan Province Smart Lubrication and Equipment Health Management Engineering Technology Research Center.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Temperature and humidity coupling has a more significant effect on the failure properties of bonded joints than a single factor, and there is not enough research on this. In this paper, joints bonded with strong toughness structural adhesives are selected for the experimental analysis of joints aged for 240 h, 480 h, and 720 h at temperatures of 40 °C and 60 °C and a humidity of 95% and 100%. The sequential double Fick’s model was used to fit the water absorption of the joints, and the comparison yielded that the water absorption of the adhesive was in accordance with Fick’s law. The quasi-static tensile tests revealed that the reduction in mechanical properties of the joints was positively correlated with the moisture content in the environment, while the competing mechanisms of post-temperature curing and hydroplasticization resulted in a slight increase in the failure strength and energy uptake of the aged joints, which is in agreement with the experimental results of the Fourier infrared spectroscopy. A combination of macroscopic failure sections and scanning electron microscope (SEM) images yielded that the failure mode of the joints changed from cohesive failure to interfacial failure with increasing ageing time. In addition, reliability analyses for the fatigue testing of joints are expected to provide guidance for the life design of bonding technology in the vehicle service temperature range.

Schlagwörter

Stichwörter der Autor:innen

adhesive-bonded jointsfailure intensitymoisture–heat agingreliability analysis

Autor:innen und Institutionen

  • School of Mechanical Engineering, North China University of Water Resources and Electric Power, Zhengzhou 450045, China.
  • School of Computer Engineering and Digital Technology, Teesside University, Middlesbrough TS1 3BA, UK.

ORCID-Profile: Han Peng, Ruixue Cheng

Förderung

  • Henan province of university technology innovation team
  • Henan Province Smart Lubrication and Equipment Health Management Engineering Technology Research Center

Zitieren

APA

Peng, H., Zhou, T., Shangguan, L., & Cheng, R. (2024). Effect of Temperature and Humidity Coupling on the Ageing Failure of Carbon Fiber Composite/Titanium Bonded Joints. Polymers, 16(7), 952. https://doi.org/10.3390/polym16070952

Vancouver

Peng H, Zhou T, Shangguan L, Cheng R. Effect of Temperature and Humidity Coupling on the Ageing Failure of Carbon Fiber Composite/Titanium Bonded Joints. Polymers. 2024;16(7):952. doi:10.3390/polym16070952

BibTeX
@article{Peng2024,
  author = {Peng, Han and Zhou, Tai and Shangguan, Linjian and Cheng, Ruixue},
  title = {Effect of Temperature and Humidity Coupling on the Ageing Failure of Carbon Fiber Composite/Titanium Bonded Joints},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {7},
  pages = {952},
  doi = {10.3390/polym16070952}
}
Kostenlos starten →