Effect of Oxidation and Silane Modifications Applied to the Bonded Material and Fibers in Carbon-Fiber-Reinforced Composite Adhesive Joints
Polymers · 08.07.2025 · 17 (14) · 1893
DOI: 10.3390/polym17141893 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 08.07.2025. Verfasst von Iclal Avinc Akpinar und 2 weiteren Autor:innen. Beteiligte Einrichtung: Office of Occupational Health and Safety, Erzurum Technical University, 25050 Erzurum, Turkey. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In carbon-fiber-reinforced composites, hydroxyl and carboxyl groups are formed on the carbon fiber surface as a result of the oxidation process applied to the fibers. These groups strengthen the interfacial bond between the fibers and the epoxy resin. In addition, the silanization process chemically bonds amino and glycidyl groups to the fiber surface, further improving adhesion and thus optimizing the performance of the joint. In light of this, the primary objective of the present study is to optimize the performance of adhesive joints by applying oxidation and silane modifications to the fibers added to the adhesive and the bonded metal materials. In this study, carbon fibers underwent oxidation treatment for 5, 10, and 20 min, followed by silanization with 3-aminopropyltriethoxysilane (APTES) and glycidoxypropyltrimethoxysilane (GPTMS) silane agents. Additionally, the surfaces of the bonded aluminum materials were subjected to a 10 min oxidation process, followed by silanization with APTES and GPTMS silane agents. The tensile test performance of single-lap joints, bonded using chemically surface-treated aluminum and composite adhesives containing 2 wt.% chemically treated carbon fibers, was experimentally investigated. According to the contact angle measurement results obtained in this study, aluminum materials subjected to oxidation treatment exhibited superhydrophilic behavior, whereas materials subjected to silanization displayed hydrophilic behavior. A similar trend was observed in the fibers. The performance of adhesive joints increased by approximately 14% when only the aluminum materials underwent oxidation treatment. Moreover, the addition of 2 wt.% carbon fibers to the adhesive enhanced the joint performance by approximately 31%. However, when oxidation treatments of varying durations were applied to both the aluminum materials and the fibers, the joint performance improved by approximately 35% to 40%. When silanization treatments were applied in addition to the oxidation treatments on aluminum and fiber surfaces, the joint performance increased by approximately 68% to 70%. These findings were corroborated through analyses performed using 3D profilometry and Scanning Electron Microscopy (SEM) imaging.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Office of Occupational Health and Safety, Erzurum Technical University, 25050 Erzurum, Turkey.
- Mechanical Engineering, Giresun University, 28200 Giresun, Turkey.
ORCID-Profile: Iclal Avinc Akpinar, Ömer Faruk Koçyiğit, Selcuk Atasoy
Zitieren
APA
Akpinar, I. A., Koçyiğit, Ö. F., & Atasoy, S. (2025). Effect of Oxidation and Silane Modifications Applied to the Bonded Material and Fibers in Carbon-Fiber-Reinforced Composite Adhesive Joints. Polymers, 17(14), 1893. https://doi.org/10.3390/polym17141893
Vancouver
Akpinar IA, Koçyiğit ÖF, Atasoy S. Effect of Oxidation and Silane Modifications Applied to the Bonded Material and Fibers in Carbon-Fiber-Reinforced Composite Adhesive Joints. Polymers. 2025;17(14):1893. doi:10.3390/polym17141893
BibTeX
@article{Akpinar2025,
author = {Akpinar, Iclal Avinc and Koçyiğit, Ömer Faruk and Atasoy, Selcuk},
title = {Effect of Oxidation and Silane Modifications Applied to the Bonded Material and Fibers in Carbon-Fiber-Reinforced Composite Adhesive Joints},
journal = {Polymers},
year = {2025},
volume = {17},
number = {14},
pages = {1893},
doi = {10.3390/polym17141893}
}
EUVIMED