EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Dimensional Accuracy and Surface Roughness of SLA Patterns and SLA-Based IC Components

Aishabibi Mukhangaliyeva, Damira Dairabayeva, Asma Perveen iD, Didier Talamona iD

Polymers · 10.10.2023 · 15 (20) · 4038

DOI: 10.3390/polym15204038 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.10.2023. Verfasst von Aishabibi Mukhangaliyeva und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Aerospace Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Astana 010000, Kazakhstan. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: by the Ministry of Industry and Infrastructure Development of the Republic of Kazakhstan, Ministry of Industry and Infrastructure Development of the Republic of Kazakhstan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rapid investment casting is a casting process in which the sacrificial patterns are fabricated using additive manufacturing techniques, making the creation of advanced designs possible. One of the popular 3D printing methods applied in rapid investment casting is stereolithography because of its high dimensional precision and surface quality. Printing parameters of the used additive manufacturing method can influence the surface quality and accuracy of the rapid investment cast geometries. Hence, this study aims to investigate the effect of stereolithography printing parameters on the dimensional accuracy and surface roughness of printed patterns and investment cast parts. Castable wax material was used to print the sacrificial patterns for casting. A small-scale prosthetic biomedical implant for total hip replacement was selected to be the benchmark model due to its practical significance. The main results indicate that the most significant stereolithography printing parameter affecting surface roughness is build angle, followed by layer thickness. The optimum parameters that minimize the surface roughness are 0.025 mm layer thickness, 0° build angle, 1.0 support density index, and across the front base orientation. As for the dimensional accuracy, the optimum stereolithography parameters are 0.025 mm layer thickness, 30° build angle, 0.6 support density index, and diagonal to the front base orientation. The optimal printing parameters to obtain superior dimensional accuracy of the cast parts are 0.05 mm layer thickness, 45° build angle, 0.8 support density index, and diagonal to the front model base orientation. With respect to the surface roughness, lower values were obtained at 0.025 mm layer thickness, 0° build angle, 1.0 support density index, and parallel to the front base orientation.

Schlagwörter

Stichwörter der Autor:innen

Taguchidimensional accuracyoptimizationprinting parametersrapid investment castingstereolithographysurface roughness

Autor:innen und Institutionen

  • Department of Mechanical and Aerospace Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Astana 010000, Kazakhstan.

ORCID-Profile: Asma Perveen, Didier Talamona

Förderung

  • by the Ministry of Industry and Infrastructure Development of the Republic of Kazakhstan
  • Ministry of Industry and Infrastructure Development of the Republic of Kazakhstan

Zitieren

APA

Mukhangaliyeva, A., Dairabayeva, D., Perveen, A., & Talamona, D. (2023). Optimization of Dimensional Accuracy and Surface Roughness of SLA Patterns and SLA-Based IC Components. Polymers, 15(20), 4038. https://doi.org/10.3390/polym15204038

Vancouver

Mukhangaliyeva A, Dairabayeva D, Perveen A, Talamona D. Optimization of Dimensional Accuracy and Surface Roughness of SLA Patterns and SLA-Based IC Components. Polymers. 2023;15(20):4038. doi:10.3390/polym15204038

BibTeX
@article{Mukhangaliyeva2023,
  author = {Mukhangaliyeva, Aishabibi and Dairabayeva, Damira and Perveen, Asma and Talamona, Didier},
  title = {Optimization of Dimensional Accuracy and Surface Roughness of SLA Patterns and SLA-Based IC Components},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {20},
  pages = {4038},
  doi = {10.3390/polym15204038}
}
Kostenlos starten →