EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electropolishing Stainless Steel Optimization Using Surface Quality, Dimensional Accuracy, and Electrical Consumption Criteria

Elena María Beamud-González, Pedro José Núñez-López iD, Eustaquio García-Plaza

Materials · 21.02.2023 · 16 (5) · 1770

DOI: 10.3390/ma16051770 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.02.2023. Verfasst von Elena María Beamud-González und 2 weiteren Autor:innen. Beteiligte Einrichtung: Mining and Industrial Engineering School, Department Applied Mechanics & Project Engineering, University of Castilla-La Mancha, Plaza Manuel Meca 1, …. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regional Government of Castile-La Mancha, University of Castilla-La Mancha, Castilla-La Mancha Community Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electropolishing (EP) processes require high electrical consumption that must be optimized to minimize production costs without sacrificing the objectives of surface quality and dimensional accuracy. The aim of the present paper was to analyze the effects of the interelectrode gap, initial surface roughness, electrolyte temperature, current density, and EP time on aspects of the EP process applied to AISI 316L stainless steel, which have not been examined in the literature, such as polishing rate, final surface roughness, dimensional accuracy, and electrical consumption cost. In addition, the paper aimed to obtain optimum individual and multi-objective considering criteria of surface quality, dimensional accuracy, and electrical consumption cost. The results showed that the electrode gap was not significant on the surface finish or current density, and the EP time was the parameter having the greatest effect on all criteria analyzed, with a temperature of 35 °C showing the best electrolyte performance. The initial surface texture with the lowest roughness Ra10 (0.5 ≤ Ra ≤ 0.8 μm) obtained the best results with a maximum polishing rate of ~90% and minimum final roughness (Ra) of ~0.035 μm. The response surface methodology showed the EP parameter effects and the optimum individual objective. The desirability function obtained the best global multi-objective optimum, while the overlapping contour plot provided optimum individual and simultaneous per polishing range.

Schlagwörter

Stichwörter der Autor:innen

dimensional accuracyelectrical consumption costelectropolishingindividual and multi-objective optimizationpolishing ratesurface roughness

Autor:innen und Institutionen

  • Mining and Industrial Engineering School, Department Applied Mechanics & Project Engineering, University of Castilla-La Mancha, Plaza Manuel Meca 1, 13400 Almadén, Spain.
  • Higher Technical School of Industrial Engineering, Energy Research and Industrial Applications Institute (INEI), Department Applied Mechanics & Project Engineering, University of Castilla-La Mancha (UCLM), Avda. Camilo…

ORCID-Profile: Pedro José Núñez-López

Förderung

  • Regional Government of Castile-La Mancha
  • University of Castilla-La Mancha
  • Castilla-La Mancha Community Council
  • ERDF (European Regional Development Fund)

Zitieren

APA

Beamud-González, E. M., Núñez-López, P. J., & García-Plaza, E. (2023). Electropolishing Stainless Steel Optimization Using Surface Quality, Dimensional Accuracy, and Electrical Consumption Criteria. Materials, 16(5), 1770. https://doi.org/10.3390/ma16051770

Vancouver

Beamud-González EM, Núñez-López PJ, García-Plaza E. Electropolishing Stainless Steel Optimization Using Surface Quality, Dimensional Accuracy, and Electrical Consumption Criteria. Materials. 2023;16(5):1770. doi:10.3390/ma16051770

BibTeX
@article{BeamudGonzlez2023,
  author = {Beamud-González, Elena María and Núñez-López, Pedro José and García-Plaza, Eustaquio},
  title = {Electropolishing Stainless Steel Optimization Using Surface Quality, Dimensional Accuracy, and Electrical Consumption Criteria},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {5},
  pages = {1770},
  doi = {10.3390/ma16051770}
}
Kostenlos starten →