EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of tool orientation on surface roughness and dimensional accuracy in ball end milling of thin-walled blades

Nagore Villarrazo, Álvaro Sáinz de la Maza, Soraya Caneda, Lele Bai, Octavio Pereira, Luis Norberto López de Lacalle

The International Journal of Advanced Manufacturing Technology · 2025-01 · 136 (1) · 383-395

DOI: 10.1007/s00170-024-14523-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 07.10.2024. Verfasst von Nagore Villarrazo und 5 weiteren Autor:innen. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad del País Vasco.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the aerospace industry, high-precision components like impellers and blisks present considerable challenges in machining due to their intricate geometries and the need for reliable performance. Blades, often classified as thin-walled parts with complex, free-form surfaces, are crucial in ensuring the efficiency and safety of aircraft engines. Their geometries and materials require strict control over cutting parameters, such as tool path and orientation, to avoid deformation and maintain surface integrity. This study investigates the impact of tilt angle variation during ball end milling of Ti6Al4V thin-walled parts. Four different tilt angles (15°, 30°, 45°, and 60°) were analysed to evaluate their effect on dimensional accuracy and surface roughness. The results show that tilt angle significantly influences surface quality and dimensional precision. A tilt angle of 30° achieved the best balance between surface finish and dimensional tolerances, with flatness values ranging from 0.038 mm at 30° to 0.101 mm at 60°, representing a 152.5% increase in flatness. The findings provide practical guidelines for optimizing ball end milling of thin-walled components, emphasizing the importance of tool orientation in reducing deformation and enhancing surface quality.

Förderung

  • Universidad del País Vasco

Zitieren

APA

Villarrazo, N., Maza, Á. S. D. L., Caneda, S., Bai, L., Pereira, O., & Lacalle, L. N. L. D. (2025). Effect of tool orientation on surface roughness and dimensional accuracy in ball end milling of thin-walled blades. The International Journal of Advanced Manufacturing Technology, 136(1), 383-395. https://doi.org/10.1007/s00170-024-14523-6

Vancouver

Villarrazo N, Maza ÁSDL, Caneda S, Bai L, Pereira O, Lacalle LNLD. Effect of tool orientation on surface roughness and dimensional accuracy in ball end milling of thin-walled blades. The International Journal of Advanced Manufacturing Technology. 2025;136(1):383-395. doi:10.1007/s00170-024-14523-6

BibTeX
@article{Villarrazo2025,
  author = {Villarrazo, Nagore and Maza, Álvaro Sáinz de la and Caneda, Soraya and Bai, Lele and Pereira, Octavio and Lacalle, Luis Norberto López de},
  title = {Effect of tool orientation on surface roughness and dimensional accuracy in ball end milling of thin-walled blades},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2025},
  volume = {136},
  number = {1},
  pages = {383--395},
  doi = {10.1007/s00170-024-14523-6}
}
Kostenlos starten →