EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Property Improvements of Silica-Filled Styrene Butadiene Rubber/Butadiene Rubber Blend Incorporated with Fatty-Acid-Containing Palm Oil

Siwarote Boonrasri iD, Parichat Thipchai, Pongdhorn Sae-Oui, Sarinthip Thanakkasaranee iD, Kittisak Jantanasakulwong, Pornchai Rachtanapun iD

Polymers · 17.08.2023 · 15 (16) · 3429

DOI: 10.3390/polym15163429 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.08.2023. Verfasst von Siwarote Boonrasri und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Engineering and Agro-Industry, Maejo University, Chiang Mai 50290, Thailand. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: faculty of engineering and Agro-Industry.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Using vegetable oils as a plasticizer or processing aid in green rubber products is becoming popular due to environmental concerns. However, differences in vegetable oil processing result in varying amounts of low-molecular-weight (low-MW) free fatty acids (FFAs) in their composition, which range from 2% to 30%. This research investigated how the properties of silica-filled styrene butadiene rubber (SBR) and butadiene rubber (BR) blends were affected by the presence of FFAs in palm oil (PO). The rubber compounds containing a 70/30 SBR/BR blend, 30 phr of silica, and 2 phr of bis-(3-triethoxysilylpropyl) tetrasulfide (TESPT), and the vulcanizing agents were prepared and tested. The PO content was kept constant at 20 phr, while the number of FFAs, i.e., lauric acid (LA), palmitic acid (PA), and oleic acid (OA), in PO varied from 10–30%. The viscosity, dynamic mechanical properties, morphology, cure characteristics, and mechanical properties of the rubber blend were then measured. Regardless of the FFA types, increasing FFA content in PO decreased scorch time, cure time, minimum torque, and viscosity. As the FFA content increased, the torque difference and crosslink density also increased, which led to higher hardness, modulus, tensile strength, and abrasion resistance. The FFA types had a slight effect on the vulcanizate properties, even though LA showed slightly better mechanical properties than PA and OA. The results reveal that FFAs in PO not only improve processability but also function as a co-activator in silica-filled sulfur-vulcanized SBR/BR blend compounds.

Schlagwörter

Stichwörter der Autor:innen

fatty acidlauric acidoleic acidpalm oilrubbersilica

Autor:innen und Institutionen

  • Faculty of Engineering and Agro-Industry, Maejo University, Chiang Mai 50290, Thailand.
  • Philosophy Program in Nanoscience and Nanotechnology (International Program/Interdisciplinary), Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.
  • MTEC, National Science and Technology Development Agency (NSTDA), Pathum Thani 12120, Thailand.
  • Division of Packaging Technology, School of Agro-Industry, Faculty of Agro-Industry, Chiang Mai University, Chiang Mai 50100, Thailand.
  • Center of Excellence in Agro Bio-Circular-Green Industry (Agro BCG), Chiang Mai University, Chiang Mai 50100, Thailand.
  • Center of Excellence in Materials Science and Technology, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.

ORCID-Profile: Siwarote Boonrasri, Sarinthip Thanakkasaranee, Pornchai Rachtanapun

Förderung

  • faculty of engineering and Agro-Industry

Zitieren

APA

Boonrasri, S., Thipchai, P., Sae-Oui, P., Thanakkasaranee, S., Jantanasakulwong, K., & Rachtanapun, P. (2023). Property Improvements of Silica-Filled Styrene Butadiene Rubber/Butadiene Rubber Blend Incorporated with Fatty-Acid-Containing Palm Oil. Polymers, 15(16), 3429. https://doi.org/10.3390/polym15163429

Vancouver

Boonrasri S, Thipchai P, Sae-Oui P, Thanakkasaranee S, Jantanasakulwong K, Rachtanapun P. Property Improvements of Silica-Filled Styrene Butadiene Rubber/Butadiene Rubber Blend Incorporated with Fatty-Acid-Containing Palm Oil. Polymers. 2023;15(16):3429. doi:10.3390/polym15163429

BibTeX
@article{Boonrasri2023,
  author = {Boonrasri, Siwarote and Thipchai, Parichat and Sae-Oui, Pongdhorn and Thanakkasaranee, Sarinthip and Jantanasakulwong, Kittisak and Rachtanapun, Pornchai},
  title = {Property Improvements of Silica-Filled Styrene Butadiene Rubber/Butadiene Rubber Blend Incorporated with Fatty-Acid-Containing Palm Oil},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {16},
  pages = {3429},
  doi = {10.3390/polym15163429}
}
Kostenlos starten →