EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rigid Polyurethane Foams as Thermal Insulation Material from Novel Suberinic Acid-Based Polyols

Aiga Ivdre iD, Arnis Abolins, Nikita Volkovs, Laima Vevere iD, Aigars Paze iD, Raimonds Makars iD, Daniela Godina, Janis Rizikovs iD

Polymers · 22.07.2023 · 15 (14) · 3124

DOI: 10.3390/polym15143124 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.07.2023. Verfasst von Aiga Ivdre und 7 weiteren Autor:innen. Beteiligte Einrichtung: Latvian State Institute of Wood Chemistry, 27 Dzerbenes St., LV-1006 Riga, Latvia. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund, ERDF project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Developing polyols from biomass sources contributes to a more circular economy by replacing petroleum-based polyols in the vast production of polyurethanes (PUR). One such potential biomass source could be leftover birch bark from which suberinic acids (SA) can be obtained. The purpose of this study was to identify the best synthesis routes for novel SA-based polyols, obtain rigid PUR foams, and evaluate their competitiveness and potential suitability as thermal insulation material. Novel polyols were synthesized from depolymerized SA by esterification with various functionality and molecular weight alcohols in several molar ratios. The moisture content, hydroxyl and acid values, and apparent viscosity were tested. Free-rise rigid PUR foams from the most suitable SA-based polyol and tall oil-based polyol were successfully prepared, reaching ~20 wt.% total renewable material content in the foam. The obtained rigid PUR foams’ morphological, mechanical, and thermal properties were investigated and compared to present foam materials, including commercial foams. The apparent density (~33 kg/m3), as well as the closed cell content (~94%), compression strength (0.25 MPa, parallel to the foaming direction), and thermal conductivity (~0.019 W/(m·K)), approved the competitiveness and potential ability of SA-based rigid PUR foam production as thermal insulation material.

Schlagwörter

Stichwörter der Autor:innen

bio-polyolspolyurethanerenewable materialsrigid polyurethane foamssuberinsuberinic acidssustainability

Autor:innen und Institutionen

  • Latvian State Institute of Wood Chemistry, 27 Dzerbenes St., LV-1006 Riga, Latvia.
  • PolyLabs SIA, 46 Mukusalas St., LV-1004 Riga, Latvia.

ORCID-Profile: Aiga Ivdre, Laima Vevere, Aigars Paze, Raimonds Makars, Janis Rizikovs

Förderung

  • European Regional Development Fund
  • ERDF project

Zitieren

APA

Ivdre, A., Abolins, A., Volkovs, N., Vevere, L., Paze, A., Makars, R., Godina, D., & Rizikovs, J. (2023). Rigid Polyurethane Foams as Thermal Insulation Material from Novel Suberinic Acid-Based Polyols. Polymers, 15(14), 3124. https://doi.org/10.3390/polym15143124

Vancouver

Ivdre A, Abolins A, Volkovs N, Vevere L, Paze A, Makars R, et al. Rigid Polyurethane Foams as Thermal Insulation Material from Novel Suberinic Acid-Based Polyols. Polymers. 2023;15(14):3124. doi:10.3390/polym15143124

BibTeX
@article{Ivdre2023,
  author = {Ivdre, Aiga and Abolins, Arnis and Volkovs, Nikita and Vevere, Laima and Paze, Aigars and Makars, Raimonds and Godina, Daniela and Rizikovs, Janis},
  title = {Rigid Polyurethane Foams as Thermal Insulation Material from Novel Suberinic Acid-Based Polyols},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {14},
  pages = {3124},
  doi = {10.3390/polym15143124}
}
Kostenlos starten →