EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

FTIR Monitoring of Polyurethane Foams Derived from Acid-Liquefied and Base-Liquefied Polyols

Yuliya Dulyanska iD, Luísa Cruz-Lopes iD, Bruno Esteves iD, Raquel Guiné iD, Idalina Domingos iD

Polymers · 03.08.2024 · 16 (15) · 2214

DOI: 10.3390/polym16152214 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 03.08.2024. Verfasst von Yuliya Dulyanska und 4 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Natural Resources, Environment and Society-CERNAS-IPV, Av. Cor. José Maria Vale de Andrade, 3504-510 Viseu, Portugal. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Foundation for Science & Technology, National Funds, Polytechnic University of Viseu.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyalcohol liquefaction can be performed by acid or base catalysis, producing polyols with different properties. This study compared the mechanical properties of foams produced using polyols from liquefied Cytisus scoparius obtained by acid and base catalysis and using two different foam catalysts. The differences were monitored using FTIR analysis. Acid-catalyzed liquefaction yielded 95.1%, with the resultant polyol having an OH index of 1081 mg KOH/g, while base catalysis yielded 82.5%, with a similar OH index of 1070 mg KOH/g. Generally, compressive strength with dibutyltin dilaurate (DBTDL) ranged from 16 to 31 kPa (acid-liquefied polyol) and 12 to 21 kPa (base-liquefied polyol), while with stannous octoate (TIN), it ranged from 17 to 42 kPa (acid) and 29 to 68 kPa (base). Increasing water content generally decreased the compressive modulus and strength of the foams. Higher water content led to a higher absorption at 1670 cm−1 in the FTIR spectrum due to the formation of urea. Higher isocyanate indices generally improved compressive strength, but high amounts led to unreacted isocyanate that could be seen by a higher absorption at 2265 cm−1 and 3290 cm−1. DBTL was shown to be the best foam catalyst due to higher trimer conversion seen in the spectra by a higher absorption at 1410 cm−1. Acid- and base-derived polyols lead to different polyurethane foams with different FTIR spectra, particularly with a higher absorption at 1670 cm−1 for foams from acid-derived liquefaction.

Schlagwörter

Stichwörter der Autor:innen

FTIRacid liquefactionbase liquefactioncompressive strengthpolyurethane foams

Autor:innen und Institutionen

  • Centre for Natural Resources, Environment and Society-CERNAS-IPV, Av. Cor. José Maria Vale de Andrade, 3504-510 Viseu, Portugal.
  • Department of Environmental Engineering, Polytechnic University of Viseu, Av. Cor. José Maria Vale de Andrade, 3504-510 Viseu, Portugal.
  • Department of Wood Engineering, Polytechnic University of Viseu, Av. Cor. José Maria Vale de Andrade, 3504-510 Viseu, Portugal.
  • Department of Food Engineering, Polytechnic University of Viseu, Av. Cor. José Maria Vale de Andrade, 3504-510 Viseu, Portugal.

ORCID-Profile: Yuliya Dulyanska, Luísa Cruz-Lopes, Bruno Esteves, Raquel Guiné, Idalina Domingos

Förderung

  • Foundation for Science & Technology
  • National Funds
  • Polytechnic University of Viseu

Zitieren

APA

Dulyanska, Y., Cruz-Lopes, L., Esteves, B., Guiné, R., & Domingos, I. (2024). FTIR Monitoring of Polyurethane Foams Derived from Acid-Liquefied and Base-Liquefied Polyols. Polymers, 16(15), 2214. https://doi.org/10.3390/polym16152214

Vancouver

Dulyanska Y, Cruz-Lopes L, Esteves B, Guiné R, Domingos I. FTIR Monitoring of Polyurethane Foams Derived from Acid-Liquefied and Base-Liquefied Polyols. Polymers. 2024;16(15):2214. doi:10.3390/polym16152214

BibTeX
@article{Dulyanska2024,
  author = {Dulyanska, Yuliya and Cruz-Lopes, Luísa and Esteves, Bruno and Guiné, Raquel and Domingos, Idalina},
  title = {FTIR Monitoring of Polyurethane Foams Derived from Acid-Liquefied and Base-Liquefied Polyols},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {15},
  pages = {2214},
  doi = {10.3390/polym16152214}
}
Kostenlos starten →