EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Characterization of an Environmentally Friendly Phenol–Formaldehyde Resin Modified with Waste Plant Protein

Hanyin Li, Sen Wang, Xiang Zhang, Hao Wu, Yujie Wang, Na Zhou, Zijie Zhao, Chao Wang, Xiaofan Zhang, Xian Wang, Cheng Li iD

Polymers · 07.07.2023 · 15 (13) · 2975

DOI: 10.3390/polym15132975 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 07.07.2023. Verfasst von Hanyin Li und 10 weiteren Autor:innen. Beteiligte Einrichtung: College of Forestry, Henan Agricultural University, Zhengzhou 450002, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Special Fund for Young Talents in Henan Agricultural University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To develop a lower-cost, excellent-performance, and environmentally friendly phenol–formaldehyde (PF) resin, soybean meal was used to modify PF resin, and soybean meal–phenol–formaldehyde (SMPF) resins were prepared. This reveals the effect of soybean meal on the structural, bonding, and curing properties of PF resin, which are very important for its applications in the wood industry. The resins’ physicochemical properties and curing performance were investigated, showing that SMPF resins have higher curing temperatures than PF resin. The Fourier transform infrared spectroscopy results indicated that a cross-linking reaction occurred between the amino groups of soybean protein and the hydroxymethyl phenol. Moreover, with the addition of soybean meal, the viscosity of SMPF increased while the gel time decreased. It is worth mentioning that SMPF-2 resin has favorable viscosity, short gel time, low curing temperature (135.78 °C), and high water resistance and bonding strength (1.01 MPa). Finally, all the plywoods bonded with SMPF resins have good water resistance and bonding strength, which could meet the standard (GB/T 17657-2013, type I) for plywood. The optimized SMPF resins showed the potential for application to partially replace PF resin in the wood industry.

Schlagwörter

Stichwörter der Autor:innen

curingphenol–formaldehyde resinplywoodsoy-based adhesivessoybean meal

Autor:innen und Institutionen

  • College of Forestry, Henan Agricultural University, Zhengzhou 450002, China.
  • College of Landscape Architecture and Art, Henan Agricultural University, Zhengzhou 450002, China.
  • Bureau of Agricultural and Rural Affairs, Luanchuan County, Luoyang 471500, China.

ORCID-Profile: Cheng Li

Förderung

  • The Special Fund for Young Talents in Henan Agricultural University

Zitieren

APA

Li, H., Wang, S., Zhang, X., Wu, H., Wang, Y., Zhou, N., Zhao, Z., Wang, C., Zhang, X., Wang, X., & Li, C. (2023). Synthesis and Characterization of an Environmentally Friendly Phenol–Formaldehyde Resin Modified with Waste Plant Protein. Polymers, 15(13), 2975. https://doi.org/10.3390/polym15132975

Vancouver

Li H, Wang S, Zhang X, Wu H, Wang Y, Zhou N, et al. Synthesis and Characterization of an Environmentally Friendly Phenol–Formaldehyde Resin Modified with Waste Plant Protein. Polymers. 2023;15(13):2975. doi:10.3390/polym15132975

BibTeX
@article{Li2023,
  author = {Li, Hanyin and Wang, Sen and Zhang, Xiang and Wu, Hao and Wang, Yujie and Zhou, Na and Zhao, Zijie and Wang, Chao and Zhang, Xiaofan and Wang, Xian and Li, Cheng},
  title = {Synthesis and Characterization of an Environmentally Friendly Phenol–Formaldehyde Resin Modified with Waste Plant Protein},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {13},
  pages = {2975},
  doi = {10.3390/polym15132975}
}
Kostenlos starten →