EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Environmentally Friendly o–Cresol–Furfural–Formaldehyde Resin as an Alternative to Traditional Phenol–Formaldehyde Resins for Paint Industry

Marta Depta iD, Sławomir Napiórkowski, Katarzyna Zielińska, Katarzyna Gębura iD, Daria Niewolik iD, Katarzyna Jaszcz iD

Materials · 22.06.2024 · 17 (13) · 3072

DOI: 10.3390/ma17133072 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.06.2024. Verfasst von Marta Depta und 5 weiteren Autor:innen. Beteiligte Einrichtung: Łukasiewicz Research Network-The Institute of Heavy Organic Synthesis "Blachownia", Energetyków 9, 47-225 Kedzierzyn-Kozle, Poland. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education, Rector of Silesian University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper describes studies on the preparation of an o–cresol–furfural–formaldehyde resin in the presence of an alkaline catalyst and its modification with n-butanol or 2-ethylhexanol. The novelty of this research is to obtain a furfural-based resin of the resole type and its etherification. Such resins are not described in the literature and also are not available on the market. The obtained resin based on furfural, which can be obtained from agricultural waste, had a low minimum content of free o–cresol < 1 wt.%, furfural < 0.1 wt.%, and formaldehyde < 0.1 wt.%. The resin structure was characterized by mass spectrometry (ESI-MS), FT-IR, and NMR spectroscopy, which showed the presence of hydroxymethylene groups in the resin before modification and alkyl groups derived from n-butanol and 2-ethylhexanol after modification. The etherified resins had a lower viscosity and were more flexible (DSC) than the resin before modification and they can be used as an environmentally friendly, safe, and sustainable alternative to traditional phenol–formaldehyde resins in the paint industry. They demonstrate the ability to create a protective coating with good adherence to metal substrates and an excellent balance of flexibility and hardness.

Schlagwörter

Stichwörter der Autor:innen

2-ethylhexanolbiomass-based resinetherificationfurfuraln-butanolo–cresol

Autor:innen und Institutionen

  • Łukasiewicz Research Network-The Institute of Heavy Organic Synthesis "Blachownia", Energetyków 9, 47-225 Kedzierzyn-Kozle, Poland.
  • Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, M. Strzody 9, 44-100 Gliwice, Poland.

ORCID-Profile: Marta Depta, Katarzyna Gębura, Daria Niewolik, Katarzyna Jaszcz

Förderung

  • Ministry of Science and Higher Education
  • Rector of Silesian University of Technology

Zitieren

APA

Depta, M., Napiórkowski, S., Zielińska, K., Gębura, K., Niewolik, D., & Jaszcz, K. (2024). Environmentally Friendly o–Cresol–Furfural–Formaldehyde Resin as an Alternative to Traditional Phenol–Formaldehyde Resins for Paint Industry. Materials, 17(13), 3072. https://doi.org/10.3390/ma17133072

Vancouver

Depta M, Napiórkowski S, Zielińska K, Gębura K, Niewolik D, Jaszcz K. Environmentally Friendly o–Cresol–Furfural–Formaldehyde Resin as an Alternative to Traditional Phenol–Formaldehyde Resins for Paint Industry. Materials. 2024;17(13):3072. doi:10.3390/ma17133072

BibTeX
@article{Depta2024,
  author = {Depta, Marta and Napiórkowski, Sławomir and Zielińska, Katarzyna and Gębura, Katarzyna and Niewolik, Daria and Jaszcz, Katarzyna},
  title = {Environmentally Friendly o–Cresol–Furfural–Formaldehyde Resin as an Alternative to Traditional Phenol–Formaldehyde Resins for Paint Industry},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3072},
  doi = {10.3390/ma17133072}
}
Kostenlos starten →