EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Mechanical Characterization of Environmentally Friendly PLA/Crop Waste Green Composites

Karolina Ewelina Mazur, Tomasz Wacław Witko iD, Alicja Kośmider, Stanisław Tadeusz Kuciel

Materials · 31.07.2025 · 18 (15) · 3608

DOI: 10.3390/ma18153608 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.07.2025. Verfasst von Karolina Ewelina Mazur und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering, Faculty of Materials Engineering and Physics, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Pol…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Center for Research and Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the fabrication and characterization of sustainable polylactic acid (PLA)-based biocomposites reinforced with bio-origin fillers derived from food waste: seashells, eggshells, walnut shells, and spent coffee grounds. All fillers were introduced at 15 wt% into a commercial PLA matrix modified with a compatibilizer to improve interfacial adhesion. Mechanical properties (tensile, flexural, and impact strength), morphological characteristics (via SEM), and hydrolytic aging behavior were evaluated. Among the tested systems, PLA reinforced with seashells (PLA15S) and coffee grounds (PLA15C) demonstrated the most balanced mechanical performance, with PLA15S achieving a tensile strength increase of 72% compared to neat PLA. Notably, PLA15C exhibited the highest stability after 28 days of hydrothermal aging, retaining ~36% of its initial tensile strength, outperforming other systems. In contrast, walnut-shell-filled composites showed the most severe degradation, losing over 98% of their mechanical strength after aging. The results indicate that both the physicochemical nature and morphology of the biofiller play critical roles in determining mechanical reinforcement and degradation resistance. This research underlines the feasibility of valorizing agri-food residues into biodegradable, semi-structural PLA composites for potential use in sustainable packaging or non-load-bearing structural applications.

Schlagwörter

Stichwörter der Autor:innen

coffee groundseggs shellshydrolytic degradationseashellswalnuts

Autor:innen und Institutionen

  • Department of Materials Engineering, Faculty of Materials Engineering and Physics, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland.
  • Department of Technology and Ecology of Products, Cracow University of Economics, Rakowicka 27, 31-510 Cracow, Poland.
  • Interdisciplinary Centre for Circular Economy, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland.

ORCID-Profile: Tomasz Wacław Witko

Förderung

  • National Center for Research and Development

Zitieren

APA

Mazur, K. E., Witko, T. W., Kośmider, A., & Kuciel, S. T. (2025). Development and Mechanical Characterization of Environmentally Friendly PLA/Crop Waste Green Composites. Materials, 18(15), 3608. https://doi.org/10.3390/ma18153608

Vancouver

Mazur KE, Witko TW, Kośmider A, Kuciel ST. Development and Mechanical Characterization of Environmentally Friendly PLA/Crop Waste Green Composites. Materials. 2025;18(15):3608. doi:10.3390/ma18153608

BibTeX
@article{Mazur2025,
  author = {Mazur, Karolina Ewelina and Witko, Tomasz Wacław and Kośmider, Alicja and Kuciel, Stanisław Tadeusz},
  title = {Development and Mechanical Characterization of Environmentally Friendly PLA/Crop Waste Green Composites},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {15},
  pages = {3608},
  doi = {10.3390/ma18153608}
}
Kostenlos starten →