EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi Scale Analysis of the Retting and Process Effect on the Properties of Flax Bio-Based Composites

Mohamed Ragoubi iD, Morgan Lecoublet, Medhi Khennache, Christophe Poilane, Nathalie Leblanc iD

Polymers · 31.05.2023 · 15 (11) · 2531

DOI: 10.3390/polym15112531 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 31.05.2023. Verfasst von Mohamed Ragoubi und 4 weiteren Autor:innen. Beteiligte Einrichtung: UniLaSalle, Unité de Recherche Transformation et Agro-Ressources, VAM²IN (ULR 7519 UniLaSalle-Université d'Artois), 76130 Mont-Saint-Aignan, France. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Region normandie, OLCO project, Normandy region.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research aimed to evaluate, at different scales (technical flax fiber, fiber band and flax composites, bio-based composites), the effect of retting and processing parameters on the biochemical, microstructural, and mechanical properties of flax-epoxy bio-based materials. On the technical flax fiber scale, a biochemical alteration of the fiber was observed as the retting increased (a decrease of the soluble fraction from 10.4 ± 0.2 to 4.5 ± 1.2% and an increase of the holocellulose fractions). This finding was associated with the degradation of the middle lamella, favoring the individualization of the flax fibers observed at retting (+). A direct link was established between the biochemical alteration of technical flax fibers and their associated mechanical properties (decrease of the ultimate modulus 69.9 to 43.6 GPa and maximum stress from 702 to 328 MPa). On the flax band scale, the mechanical properties are driven by the interface quality between the technical fibers. The highest maximum stresses were reached at level retting (0) with 26.68 MPa, which is lower compared to technical fiber. On the bio-based composites scale, setup 3 (T = 160 ∘C) and the high retting level (+) are the most relevant for a better mechanical response of flax bio-based materials.

Schlagwörter

Stichwörter der Autor:innen

bio-based materialsflax morphologyphysical and mechanical propertiesporosityprocessing parameterspropertyretting effect

Autor:innen und Institutionen

  • UniLaSalle, Unité de Recherche Transformation et Agro-Ressources, VAM²IN (ULR 7519 UniLaSalle-Université d'Artois), 76130 Mont-Saint-Aignan, France.
  • Normandie University, ENSICAEN, UNICAEN, CEA, CNRS, CIMAP, 14000 Caen, France.

ORCID-Profile: Mohamed Ragoubi, Nathalie Leblanc

Förderung

  • Region normandie
  • OLCO project
  • Normandy region
  • FEDER

Zitieren

APA

Ragoubi, M., Lecoublet, M., Khennache, M., Poilane, C., & Leblanc, N. (2023). Multi Scale Analysis of the Retting and Process Effect on the Properties of Flax Bio-Based Composites. Polymers, 15(11), 2531. https://doi.org/10.3390/polym15112531

Vancouver

Ragoubi M, Lecoublet M, Khennache M, Poilane C, Leblanc N. Multi Scale Analysis of the Retting and Process Effect on the Properties of Flax Bio-Based Composites. Polymers. 2023;15(11):2531. doi:10.3390/polym15112531

BibTeX
@article{Ragoubi2023,
  author = {Ragoubi, Mohamed and Lecoublet, Morgan and Khennache, Medhi and Poilane, Christophe and Leblanc, Nathalie},
  title = {Multi Scale Analysis of the Retting and Process Effect on the Properties of Flax Bio-Based Composites},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {11},
  pages = {2531},
  doi = {10.3390/polym15112531}
}
Kostenlos starten →