EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication and Characterisation of Fully Bio-Based Flax Fibre-Reinforced Polyester Composites

Lorenz Walter, Michael Scherdel, Iman Taha

Journal of Composites Science · 14.05.2025 · 9 (5) · 241

DOI: 10.3390/jcs9050241 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 14.05.2025. Verfasst von Lorenz Walter und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Carl Zeiss-Foundation (CZS-Forschungsstart).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of lightweight construction is of crucial importance for the development of sustainable technologies and for the reduction in carbon dioxide emissions, especially in the automotive industry. This study aims to address the challenges associated with manufacturing plant fibre-based polymer composites. The investigation focused on two novel formulations of bio-based unsaturated polyester resins, assessing their viability as a matrix in plant fibre-reinforced composites within the context of automotive applications. The study addresses the challenges related to the preparation and processing of the system, leading to the necessity of diluting the resin with (hydroxymethyl)methacrylate (HEMA) to achieve an applicable viscosity. Two different flax fibre textiles, in the form of a short fibre mat and a woven fabric, were used as reinforcement. The composite panels were manufactured using the vacuum-assisted resin infusion (VARI) process. The most efficacious material combination, comprising Bcomp® ampliTex™ 5040 and STRUKTOL® POLYVERTEC® 3831, with viscosity modified by 39% HEMA, exhibited a consistent fibre volume fraction of 40% and a glass transition temperature of 70 °C. In addition, the mechanical behaviour in the 0°-direction demonstrated tensile strength and modulus values of approximately 99 MPa and 9 GPa, respectively, accompanied by an elongation at break of 2%. The flexural modulus was found to be 7 GPa, and the flexural strength 94 MPa.

Förderung

  • Carl Zeiss-Foundation (CZS-Forschungsstart)

Zitieren

APA

Walter, L., Scherdel, M., & Taha, I. (2025). Fabrication and Characterisation of Fully Bio-Based Flax Fibre-Reinforced Polyester Composites. Journal of Composites Science, 9(5), 241. https://doi.org/10.3390/jcs9050241

Vancouver

Walter L, Scherdel M, Taha I. Fabrication and Characterisation of Fully Bio-Based Flax Fibre-Reinforced Polyester Composites. Journal of Composites Science. 2025;9(5):241. doi:10.3390/jcs9050241

BibTeX
@article{Walter2025,
  author = {Walter, Lorenz and Scherdel, Michael and Taha, Iman},
  title = {Fabrication and Characterisation of Fully Bio-Based Flax Fibre-Reinforced Polyester Composites},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {5},
  pages = {241},
  doi = {10.3390/jcs9050241}
}
Kostenlos starten →