Composites with Flax and Hemp Fibers Obtained Using Osmotic Degumming, Water-Retting, and Dew-Retting Processes
Materials · 07.07.2025 · 18 (13) · 3200
DOI: 10.3390/ma18133200 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.07.2025. Verfasst von Wanda Różańska und 1 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Natural Fibres & Medicinal Plants-National Research Institute, Wojska Polskiego 71B, 60-630 Poznan, Poland. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education, Ministry of Education and Science of Poland.
Abstract (Originalsprache)
This study presents the application of flax (Linum usitatissimum L.) and hemp (Cannabis sativa L.) fibers into composites with polyethylene matrices. The applied fibers were obtained using osmotic, water-retting, and dew-retting processes. The study determined the impact of the fiber extraction method on the properties of the composites obtained from natural filler and polyethylene matrix. These properties included color, tensile strength, thermal stability, adhesion of filler to the polymer, and flammability. It has been shown that the addition of flax and hemp fibers improves the mechanical properties of the composite compared to pure polymer. The tensile strength of the pure polymer samples was 24.64 MPa, while the tensile strength of composites reinforced with flax fibers ranged from 31.26 to 34.45 MPa, and those reinforced with hemp fibers ranged from 31.41 to 33.36 MPa. Studying the composites’ flammability showed that filling them with osmotic degummed hemp fibers reduced the maximum heat release rate by over 34% for hemp compared to pure polymer. This research shows that the composites filled with flax and hemp fibers, regardless of extraction method, are characterized by reduced flammability and improved mechanical properties compared to the pure polyethylene samples.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Natural Fibres & Medicinal Plants-National Research Institute, Wojska Polskiego 71B, 60-630 Poznan, Poland.
ORCID-Profile: Wanda Różańska, Szymon Rojewski
Förderung
- Ministry of Science and Higher Education
- Ministry of Education and Science of Poland
Zitieren
APA
Różańska, W., & Rojewski, S. (2025). Composites with Flax and Hemp Fibers Obtained Using Osmotic Degumming, Water-Retting, and Dew-Retting Processes. Materials, 18(13), 3200. https://doi.org/10.3390/ma18133200
Vancouver
Różańska W, Rojewski S. Composites with Flax and Hemp Fibers Obtained Using Osmotic Degumming, Water-Retting, and Dew-Retting Processes. Materials. 2025;18(13):3200. doi:10.3390/ma18133200
BibTeX
@article{Raska2025,
author = {Różańska, Wanda and Rojewski, Szymon},
title = {Composites with Flax and Hemp Fibers Obtained Using Osmotic Degumming, Water-Retting, and Dew-Retting Processes},
journal = {Materials},
year = {2025},
volume = {18},
number = {13},
pages = {3200},
doi = {10.3390/ma18133200}
}
EUVIMED