EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Calcium Carbonate Coating of 3D-Printed PLA ScaffoldsIntended for Biomedical Applications

Ricardo Donate iD, Rubén Paz iD, Álvaro Quintana iD, Pablo Bordón iD, Mario Monzón iD

Polymers · 29.05.2023 · 15 (11) · 2506

DOI: 10.3390/polym15112506 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.05.2023. Verfasst von Ricardo Donate und 4 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingeniería Mecánica, Grupo de Investigación en Fabricación Integrada y Avanzada, Universidad de Las Palmas de Gran Canaria, Campus Un…. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MCIN/AEI/10.13039/501100011033, Spanish Ministry of Science and Innovation, ERDF funds.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The incorporation of ceramic additives is the most commonly used strategy to improve the biofunctionality of polymer-based scaffolds intended for bone regeneration. By embedding ceramic particles as a coating, the functionality improvement in the polymeric scaffolds can be concentrated on the cell–surface interface, thus creating a more favourable environment for the adhesion and proliferation of osteoblastic cells. In this work, a pressure-assisted and heat-induced method to coat polylactic acid (PLA) scaffolds with calcium carbonate (CaCO3) particles is presented for the first time. The coated scaffolds were evaluated by optical microscopy observations, a scanning electron microscopy analysis, water contact angle measurements, compression testing, and an enzymatic degradation study. The ceramic particles were evenly distributed, covered more than 60% of the surface, and represented around 7% of the coated scaffold weight. A strong bonding interface was achieved, and the thin layer of CaCO3 (~20 µm) provided a significant increase in the mechanical properties (with a compression modulus improvement up to 14%) while also enhancing the surface roughness and hydrophilicity. The results of the degradation study confirmed that the coated scaffolds were able to maintain the pH of the media during the test (~7.6±0.1), in contrast to the pure PLA scaffolds, for which a value of 5.07±0.1 was obtained. The ceramic-coated scaffolds developed showed potential for further evaluations in bone tissue engineering applications.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingbiomaterialsbone tissue engineeringceramic additivessurface coating

Autor:innen und Institutionen

  • Departamento de Ingeniería Mecánica, Grupo de Investigación en Fabricación Integrada y Avanzada, Universidad de Las Palmas de Gran Canaria, Campus Universitario de Tafira s/n, 35017 Las Palmas, Spain.

ORCID-Profile: Ricardo Donate, Rubén Paz, Álvaro Quintana, Pablo Bordón, Mario Monzón

Förderung

  • MCIN/AEI/10.13039/501100011033
  • Spanish Ministry of Science and Innovation
  • ERDF funds

Zitieren

APA

Donate, R., Paz, R., Quintana, Á., Bordón, P., & Monzón, M. (2023). Calcium Carbonate Coating of 3D-Printed PLA ScaffoldsIntended for Biomedical Applications. Polymers, 15(11), 2506. https://doi.org/10.3390/polym15112506

Vancouver

Donate R, Paz R, Quintana Á, Bordón P, Monzón M. Calcium Carbonate Coating of 3D-Printed PLA ScaffoldsIntended for Biomedical Applications. Polymers. 2023;15(11):2506. doi:10.3390/polym15112506

BibTeX
@article{Donate2023,
  author = {Donate, Ricardo and Paz, Rubén and Quintana, Álvaro and Bordón, Pablo and Monzón, Mario},
  title = {Calcium Carbonate Coating of 3D-Printed PLA ScaffoldsIntended for Biomedical Applications},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {11},
  pages = {2506},
  doi = {10.3390/polym15112506}
}
Kostenlos starten →