Influence of Fabrication Technique on Adhesion and Biofilm Formation of Candida albicans to Conventional, Milled, and 3D-Printed Denture Base Resin Materials: A Comparative In Vitro Study
Polymers · 10.04.2023 · 15 (8) · 1836
DOI: 10.3390/polym15081836 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.04.2023. Verfasst von Reham B Osman und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Faculty of Dentistry, Cairo University, Giza 12613, Egypt. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Sharjah, Deputyship for Research and Innovation, Ministry of Education in Saudi Arabia,.
Abstract (Originalsprache)
The aim of this study was to evaluate the adhesion and biofilm formation of Candida albicans (C. albicans) on conventionally fabricated, milled, and 3D-printed denture base resin materials in order to determine the susceptibility of denture contamination during clinical use. Specimens were incubated with C. albicans (ATCC 10231) for 1 and 24 h. Adhesion and biofilm formation of C. albicans were assessed using the field emission scanning electron microscopy (FESEM). The XTT (2,3-(2-methoxy-4-nitro-5-sulphophenyl)-5-[(phenylamino) carbonyl]-2H-tetrazolium hydroxide) assay was used for the quantification of fungal adhesion and biofilm formation. The data were analyzed using GraphPad Prism 8.02 for windows. One-way ANOVA with Tukey’s post hoc testing were performed with a statistical significance level set at α = 0.05. The quantitative XTT biofilm assay revealed significant differences in the biofilm formation of C. albicans between the three groups in the 24 h incubation period. The highest proportion of biofilm formation was observed in the 3D-printed group, followed by the conventional group, while the lowest candida biofilm formation was observed in the milled group. The difference in biofilm formation among the three tested dentures was statistically significant (p < 0.001). The manufacturing technique has an influence on the surface topography and microbiological properties of the fabricated denture base resin material. Additive 3D-printing technology results in increased candida adhesion and the roughest surface topography of maxillary resin denture base as compared to conventional flask compression and CAD/CAM milling techniques. In a clinical setting, patients wearing additively manufactured maxillary complete dentures are thus more susceptible to the development of candida-associated denture stomatitis and accordingly, strict oral hygiene measures and maintenance programs should be emphasized to patients.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics, Faculty of Dentistry, Cairo University, Giza 12613, Egypt.
- Department of Pharmaceutics and Pharmaceutical Technology, College of Pharmacy, University of Sharjah, Sharjah P.O. Box 27272, United Arab Emirates.
- Research Institute for Medical and Health Sciences, University of Sharjah, Sharjah P.O. Box 27272, United Arab Emirates.
- Chemistry of Natural and Microbial Products Department, National Research Center, Giza 12622, Egypt.
- Independent Researcher, Dubai, United Arab Emirates.
- Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh 11451, Saudi Arabia.
ORCID-Profile: Reham B Osman, Ghalia Khoder, Nawal Alharbi
Förderung
- University of Sharjah
- Deputyship for Research and Innovation, Ministry of Education in Saudi Arabia,
Zitieren
APA
Osman, R. B., Khoder, G., Fayed, B., Kedia, R. A., Elkareimi, Y., & Alharbi, N. (2023). Influence of Fabrication Technique on Adhesion and Biofilm Formation of Candida albicans to Conventional, Milled, and 3D-Printed Denture Base Resin Materials: A Comparative In Vitro Study. Polymers, 15(8), 1836. https://doi.org/10.3390/polym15081836
Vancouver
Osman RB, Khoder G, Fayed B, Kedia RA, Elkareimi Y, Alharbi N. Influence of Fabrication Technique on Adhesion and Biofilm Formation of Candida albicans to Conventional, Milled, and 3D-Printed Denture Base Resin Materials: A Comparative In Vitro Study. Polymers. 2023;15(8):1836. doi:10.3390/polym15081836
BibTeX
@article{Osman2023,
author = {Osman, Reham B and Khoder, Ghalia and Fayed, Bahgat and Kedia, Reena Arora and Elkareimi, Yaser and Alharbi, Nawal},
title = {Influence of Fabrication Technique on Adhesion and Biofilm Formation of Candida albicans to Conventional, Milled, and 3D-Printed Denture Base Resin Materials: A Comparative In Vitro Study},
journal = {Polymers},
year = {2023},
volume = {15},
number = {8},
pages = {1836},
doi = {10.3390/polym15081836}
}
EUVIMED