Influence of Denture Base Fabrication on Candida albicans Adhesion and Early Biofilm: An In Vitro Comparison of Five Techniques
Dentistry Journal · 01.05.2026 · 14 (5) · 262
DOI: 10.3390/dj14050262 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 01.05.2026. Verfasst von Victor Moreno-Prieto und 3 weiteren Autor:innen. Beteiligte Einrichtung: Facultad de Ciencias de la Salud, Escuela de Odontología, Universidad Norbert Wiener, Av. Arequipa 444, Lima 15046, Peru. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad Norbert Wiener, Universidad Norbert Wiener, Lima, Peru.
Abstract (Originalsprache)
Background/Objectives: Denture stomatitis is closely associated with Candida albicans colonization of denture-base surfaces. This in vitro study compared early adhesion (1 h) and initial biofilm formation (24 h) of C. albicans across five denture-base-related material groups using adhered cell counts and adhered/inoculum proportions.
Methods
A 5 × 2 factorial design (five material groups; 1 and 24 h) evaluated a comparator pattern resin, heat-polymerized acrylic resin, autopolymerizing acrylic resin, milled CAD/CAM PMMA, and microwave-polymerized acrylic resin. All specimens underwent standardized finishing and mechanical polishing before microbiological testing. Data were log10-transformed and analyzed by two-way ANOVA (material group, time) with Tukey’s post hoc test. An external SEM-based qualitative laboratory report was used as complementary documentation of C. albicans presence after 1 h and 24 h; representative micrographs and quantitative SEM image outputs were unavailable.
Results
Material group, time, and their interaction significantly affected adhered C. albicans counts (p < 0.05). At 1 h, the comparator pattern resin showed the highest adhesion, whereas at 24 h, milled CAD/CAM PMMA showed the highest adhered load. For the adhered/inoculum fraction, both material group and time were significant; at 24 h, the heat-polymerized acrylic resin showed the lowest adhered fraction.
Conclusions
Under the standardized finishing and mechanical polishing conditions of this in vitro model, the tested material groups showed different C. albicans adhesion/biofilm patterns over time; clinical extrapolation should be made with caution.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Facultad de Ciencias de la Salud, Escuela de Odontología, Universidad Norbert Wiener, Av. Arequipa 444, Lima 15046, Peru.
Förderung
- Universidad Norbert Wiener
- Universidad Norbert Wiener, Lima, Peru
Zitieren
APA
Moreno-Prieto, V., Guillén-Galarza, C. E., Gómez-Carrión, C. E., & Schwan-Silva, I. (2026). Influence of Denture Base Fabrication on Candida albicans Adhesion and Early Biofilm: An In Vitro Comparison of Five Techniques. Dentistry Journal, 14(5), 262. https://doi.org/10.3390/dj14050262
Vancouver
Moreno-Prieto V, Guillén-Galarza CE, Gómez-Carrión CE, Schwan-Silva I. Influence of Denture Base Fabrication on Candida albicans Adhesion and Early Biofilm: An In Vitro Comparison of Five Techniques. Dentistry Journal. 2026;14(5):262. doi:10.3390/dj14050262
BibTeX
@article{MorenoPrieto2026,
author = {Moreno-Prieto, Victor and Guillén-Galarza, Carlos Enrique and Gómez-Carrión, Christian Esteban and Schwan-Silva, Ignacio},
title = {Influence of Denture Base Fabrication on Candida albicans Adhesion and Early Biofilm: An In Vitro Comparison of Five Techniques},
journal = {Dentistry Journal},
year = {2026},
volume = {14},
number = {5},
pages = {262},
doi = {10.3390/dj14050262}
}
EUVIMED