Fracture Resistance Analysis of CAD/CAM Interim Fixed Prosthodontic Materials: PMMA, Graphene, Acetal Resin and Polysulfone
Polymers · 01.04.2023 · 15 (7) · 1761
DOI: 10.3390/polym15071761 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 01.04.2023. Verfasst von Cristian Abad-Coronel und 4 weiteren Autor:innen. Beteiligte Einrichtung: CAD/CAM Materials and Digital Dentistry Research Group, Faculty of Dentistry, Universidad de Cuenca, Cuenca 010107, Ecuador. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The aim of this study was to evaluate and compare the fracture resistance of temporary restorations made of polymethylmethacrylate (PMMA), graphene-modified PMMA (GRA), acetal resin (AR) and polysulfone (PS) obtained by a subtractive technique (milling) using a computer-aided design and manufacturing (CAD/CAM) system of a three-unit fixed dental prosthesis (FDP).
Methods
Four groups of ten samples were fabricated for each material. Each specimen was characterized by a compression test on a universal testing machine, all specimens were loaded to fracture and the value in Newtons (N) was recorded by software connected to the testing machine. The fracture mode was evaluated on all samples using a stereomicroscope.
Results
There were statistically significant differences (p value < 0.005) between PMMA and the other three materials (PMMA: 1302.71 N; GRA: 1990.02 N; RA: 1796.20 N; PS: 2234.97). PMMA presented a significantly lower value than the other materials, and PS showed the highest value. GRA and RA presented a similar range of values but they were still higher than those of PMMA.
Conclusions
GRA, RA and PS are presented as valid options within the range of interim milled restorative materials and as alternatives to PMMA.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- CAD/CAM Materials and Digital Dentistry Research Group, Faculty of Dentistry, Universidad de Cuenca, Cuenca 010107, Ecuador.
- Faculty of Dentistry, Universidad de Cuenca, Cuenca 010101, Ecuador.
- New Materials and Transformation Processes Research Group GiMaT, Universidad Politécnica Salesiana, Cuenca 170517, Ecuador.
- Mechanical Enginnering Faculty, Universidad Politécnica Salesiana, Cuenca 170517, Ecuador.
ORCID-Profile: Cristian Abad-Coronel, César A Paltán, Jorge I Fajardo
Zitieren
APA
Abad-Coronel, C., Calle, C., Abril, G., Paltán, C. A., & Fajardo, J. I. (2023). Fracture Resistance Analysis of CAD/CAM Interim Fixed Prosthodontic Materials: PMMA, Graphene, Acetal Resin and Polysulfone. Polymers, 15(7), 1761. https://doi.org/10.3390/polym15071761
Vancouver
Abad-Coronel C, Calle C, Abril G, Paltán CA, Fajardo JI. Fracture Resistance Analysis of CAD/CAM Interim Fixed Prosthodontic Materials: PMMA, Graphene, Acetal Resin and Polysulfone. Polymers. 2023;15(7):1761. doi:10.3390/polym15071761
BibTeX
@article{AbadCoronel2023,
author = {Abad-Coronel, Cristian and Calle, Carolina and Abril, Gabriela and Paltán, César A and Fajardo, Jorge I},
title = {Fracture Resistance Analysis of CAD/CAM Interim Fixed Prosthodontic Materials: PMMA, Graphene, Acetal Resin and Polysulfone},
journal = {Polymers},
year = {2023},
volume = {15},
number = {7},
pages = {1761},
doi = {10.3390/polym15071761}
}
EUVIMED