EUVIMEDEUVIMED entdecken
Scoping ReviewOpen Access · CC BY 4.0

Fracture Toughness of CAD/CAM Resin-Based Materials vs. Direct Composite Resins: A Scoping Review

Socratis Thomaidis, Eftychia Pappa, Maria Antoniadou

Applied Sciences · 20.11.2025 · 15 (22) · 12308

DOI: 10.3390/app152212308 ↗

Kurz gefasst

Scoping Review in der Zeitschrift Applied Sciences, online erschienen am 20.11.2025. Verfasst von Socratis Thomaidis und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 111 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To compare the fracture toughness of CAD/CAM resin-based restorative materials and direct composite resins. Materials and Methods: A systematic search was conducted in July 2025 across PubMed/MEDLINE, EBSCO, Scopus, ISI Web of Science, and grey literature. Eligible studies were only in vitro investigations evaluating fracture toughness of direct composite resins and CAD/CAM hybrid materials. Study selection, data extraction, and risk-of-bias assessment were performed independently by two reviewers. A systematic review and meta-analysis were not performed due to methodological heterogeneity, and findings were synthesized qualitatively.

Results

Fifty-two studies met the inclusion criteria, including 16 assessing CAD/CAM restorative materials. Considerable variability in fracture toughness values was observed, even within the same material type. Most studies were judged to present a medium risk of bias. Short fiber-reinforced composites exhibited higher fracture toughness, whereas other CAD/CAM resin-based materials showed values comparable to direct composites.

Conclusions

Current evidence does not confirm superior fracture toughness of CAD/CAM resin-based materials compared with direct composites. Short fiber-reinforced composites appear to offer improved resistance to crack propagation. Standardized testing protocols are needed to enable more reliable comparisons.

Zitieren

APA

Thomaidis, S., Pappa, E., & Antoniadou, M. (2025). Fracture Toughness of CAD/CAM Resin-Based Materials vs. Direct Composite Resins: A Scoping Review. Applied Sciences, 15(22), 12308. https://doi.org/10.3390/app152212308

Vancouver

Thomaidis S, Pappa E, Antoniadou M. Fracture Toughness of CAD/CAM Resin-Based Materials vs. Direct Composite Resins: A Scoping Review. Applied Sciences. 2025;15(22):12308. doi:10.3390/app152212308

BibTeX
@article{Thomaidis2025,
  author = {Thomaidis, Socratis and Pappa, Eftychia and Antoniadou, Maria},
  title = {Fracture Toughness of CAD/CAM Resin-Based Materials vs. Direct Composite Resins: A Scoping Review},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {22},
  pages = {12308},
  doi = {10.3390/app152212308}
}
Kostenlos starten →