EUVIMEDOdkrijte EUVIMED
Open access · CC BY 4.0

Effect of Environment on Acetylated Cellulose Nanocrystal-Reinforced Biopolymers Films

Ana Oberlintner iD, Blaž Likozar iD, Uroš Novak iD

Polymers · 2023-03-27 · 15 (7) · 1663

DOI: 10.3390/polym15071663 ↗

At a glance

Journal article in Polymers, published online on 2023-03-27. Written by Ana Oberlintner and 2 co-authors. Institution: Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, SI-1000 Ljubljana, Slovenia. Cited 13 times so far (Crossref); 42 references. The full text is freely available (open access, CC BY 4.0). Funded by: Slovenian Research Agency, European Commission, Slovenian Research Agency research core funding.

PovzetekSubjectsBibliografski podatkiCiteRelated studies

Abstract (original language)

Cellulose nanocrystals (CNCs) were acetylated to the various parametrised degrees of substitution (DS), determined through attenuated total reflection Fourier transform infrared spectroscopy (ATR–FTIR) and incorporated into alginate (ALG) and chitosan (CH) film-forming solutions. An investigation of morphology with scanning electron microscopy (SEM) revealed increased chemical compatibility with the CH matrix after acetylation, producing a smooth surface layer, while ALG mixed better with pristine CNCs. The ATR–FTIR analysis of films demonstrated inter-diffusional structural changes upon the integration of pristine/modified CNCs. Films were evaluated in terms of water contact angle (WCA), which decreased upon CNC addition in either of the biocomposite types. The H2O barrier assessed through applicative vapour transmission (WVT) rate increased with the CNC esterification in CH, but was not influenced in ALG. To evaluate the relationship between environmental humidity and mechanical properties, conditioning was applied for 48 h under controlled relative humidity (33%, 54% and 75%) prior to the evaluation of the mechanical properties and moisture content. It was observed that tensile strength was highest upon specimens being dry (25 ± 3 MPa for ALG, reinforced with neat CNCs, or 16 ± 2 MPa in the CH with CNCs, reacting to the highest DS), lowering with dewing, and the elongation at break exhibited the opposite. It is worth noting that the modification of CNCs improved the best base benchmark stress–strain performance. Lastly, (thermal) stability was assessed by means of the thermogravimetric analysis (TGA) technique, suggesting a slight improvement.

Subjects

Author keywords

acetylationbio-based flexible packagingbionanocompositesbiopolymer-based composite filmsfunctionalisationreinforcing cellulose nanocrystal

Authors and institutions

  • Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, SI-1000 Ljubljana, Slovenia.
  • International Postgraduate School Jožef Stefan, SI-1000 Ljubljana, Slovenia.

ORCID profiles: Ana Oberlintner, Blaž Likozar, Uroš Novak

Funding

  • Slovenian Research Agency
  • European Commission
  • Slovenian Research Agency research core funding
  • PhD Grant (Ana Oberlintner)
  • Horizon Europe projects ESTELLA
  • REMEDIES
  • RURALITIES

Cite

APA

Oberlintner, A., Likozar, B., & Novak, U. (2023). Effect of Environment on Acetylated Cellulose Nanocrystal-Reinforced Biopolymers Films. Polymers, 15(7), 1663. https://doi.org/10.3390/polym15071663

Vancouver

Oberlintner A, Likozar B, Novak U. Effect of Environment on Acetylated Cellulose Nanocrystal-Reinforced Biopolymers Films. Polymers. 2023;15(7):1663. doi:10.3390/polym15071663

BibTeX
@article{Oberlintner2023,
  author = {Oberlintner, Ana and Likozar, Blaž and Novak, Uroš},
  title = {Effect of Environment on Acetylated Cellulose Nanocrystal-Reinforced Biopolymers Films},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {7},
  pages = {1663},
  doi = {10.3390/polym15071663}
}
Start for free →