Effect of Heating and Citric Acid on the Performance of Cellulose Nanocrystal Thin Films
Polymers · 29.03.2023 · 15 (7) · 1698
DOI: 10.3390/polym15071698 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.03.2023. Verfasst von Emília Csiszár und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physical Chemistry and Materials Science, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Econo…. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation, National Scientific Research Fund of Hungary (OTKA), Ministry of Human Capacities (BME FIKP-BIO).
Abstract (Originalsprache)
Cellulose nanocrystals (CNCs) were extracted from bleached cotton by sulfuric acid hydrolysis. Thin films were prepared from the aqueous suspension of CNCs by casting and evaporation with 15% glycerol as a plasticizer. Our research aimed to create stable films resistant to water. The structure and the interactions of the films were modified by short (10 min) heating at different temperatures (100, 140, and 160 °C) and by adding different amounts of citric acid (0, 10, 20, and 30%). Various analytical methods were used to determine the structure, surface properties, and mechanical properties. The interaction of composite films with water and water vapor was also investigated. Heat treatment did not significantly affect the film properties. Citric acid, without heat treatment, acted as a plasticizer. It promoted the disintegration of films in water, increased water vapor sorption, and reduced tensile strength, resulting in flexible and easy-to-handle films. The combination of heat treatment and citric acid resulted in stable liquid-water-resistant films with excellent mechanical properties. A minimum heating temperature of 120 °C and a citric acid concentration of 20% were required to obtain a stable CNC film structure resistant to liquid water.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physical Chemistry and Materials Science, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary.
- Institute of Materials and Environmental Chemistry, Research Centre for Natural Sciences, Magyar Tudósok Körútja 2., H-1117 Budapest, Hungary.
ORCID-Profile: Erika Fekete
Förderung
- National Research Foundation
- National Scientific Research Fund of Hungary (OTKA)
- Ministry of Human Capacities (BME FIKP-BIO)
Zitieren
APA
Csiszár, E., Herceg, I., & Fekete, E. (2023). Effect of Heating and Citric Acid on the Performance of Cellulose Nanocrystal Thin Films. Polymers, 15(7), 1698. https://doi.org/10.3390/polym15071698
Vancouver
Csiszár E, Herceg I, Fekete E. Effect of Heating and Citric Acid on the Performance of Cellulose Nanocrystal Thin Films. Polymers. 2023;15(7):1698. doi:10.3390/polym15071698
BibTeX
@article{Csiszr2023,
author = {Csiszár, Emília and Herceg, Imola and Fekete, Erika},
title = {Effect of Heating and Citric Acid on the Performance of Cellulose Nanocrystal Thin Films},
journal = {Polymers},
year = {2023},
volume = {15},
number = {7},
pages = {1698},
doi = {10.3390/polym15071698}
}
EUVIMED