Effect of Environment on Acetylated Cellulose Nanocrystal-Reinforced Biopolymers Films
Polymers · 27.03.2023 · 15 (7) · 1663
DOI: 10.3390/polym15071663 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 27.03.2023. Verfasst von Ana Oberlintner und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, SI-1000 Ljubljana, Slovenia. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovenian Research Agency, European Commission, Slovenian Research Agency research core funding.
Abstract (Originalsprache)
Cellulose nanocrystals (CNCs) were acetylated to the various parametrised degrees of substitution (DS), determined through attenuated total reflection Fourier transform infrared spectroscopy (ATR–FTIR) and incorporated into alginate (ALG) and chitosan (CH) film-forming solutions. An investigation of morphology with scanning electron microscopy (SEM) revealed increased chemical compatibility with the CH matrix after acetylation, producing a smooth surface layer, while ALG mixed better with pristine CNCs. The ATR–FTIR analysis of films demonstrated inter-diffusional structural changes upon the integration of pristine/modified CNCs. Films were evaluated in terms of water contact angle (WCA), which decreased upon CNC addition in either of the biocomposite types. The H2O barrier assessed through applicative vapour transmission (WVT) rate increased with the CNC esterification in CH, but was not influenced in ALG. To evaluate the relationship between environmental humidity and mechanical properties, conditioning was applied for 48 h under controlled relative humidity (33%, 54% and 75%) prior to the evaluation of the mechanical properties and moisture content. It was observed that tensile strength was highest upon specimens being dry (25 ± 3 MPa for ALG, reinforced with neat CNCs, or 16 ± 2 MPa in the CH with CNCs, reacting to the highest DS), lowering with dewing, and the elongation at break exhibited the opposite. It is worth noting that the modification of CNCs improved the best base benchmark stress–strain performance. Lastly, (thermal) stability was assessed by means of the thermogravimetric analysis (TGA) technique, suggesting a slight improvement.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, SI-1000 Ljubljana, Slovenia.
- International Postgraduate School Jožef Stefan, SI-1000 Ljubljana, Slovenia.
ORCID-Profile: Ana Oberlintner, Blaž Likozar, Uroš Novak
Förderung
- Slovenian Research Agency
- European Commission
- Slovenian Research Agency research core funding
- PhD Grant (Ana Oberlintner)
- Horizon Europe projects ESTELLA
- REMEDIES
- RURALITIES
Zitieren
APA
Oberlintner, A., Likozar, B., & Novak, U. (2023). Effect of Environment on Acetylated Cellulose Nanocrystal-Reinforced Biopolymers Films. Polymers, 15(7), 1663. https://doi.org/10.3390/polym15071663
Vancouver
Oberlintner A, Likozar B, Novak U. Effect of Environment on Acetylated Cellulose Nanocrystal-Reinforced Biopolymers Films. Polymers. 2023;15(7):1663. doi:10.3390/polym15071663
BibTeX
@article{Oberlintner2023,
author = {Oberlintner, Ana and Likozar, Blaž and Novak, Uroš},
title = {Effect of Environment on Acetylated Cellulose Nanocrystal-Reinforced Biopolymers Films},
journal = {Polymers},
year = {2023},
volume = {15},
number = {7},
pages = {1663},
doi = {10.3390/polym15071663}
}
EUVIMED