Influence of Chitosan and Grape Seed Extract on Thermal and Mechanical Properties of PLA Blends
Polymers · 22.03.2023 · 15 (6) · 1570
DOI: 10.3390/polym15061570 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 22.03.2023. Verfasst von Victoria Goetjes und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Material Engineering, Polymer Engineering, University of Kassel, Mönchebergstr. 3, 34125 Kassel, Germany. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Center for Interdisciplinary Nanostructure Science and Technology, Universität Kassel, CINSaT Seed Money from Universität Kassel.
Abstract (Originalsprache)
Blends based on polylactic acid (PLA), chitosan, and grape seed extract (GE) were prepared by extrusion and injection molding. The effect of chitosan (5% and 15% on PLA basis) and natural extract (1% on PLA basis) incorporated into the PLA host matrix was explored regarding the thermal and mechanical properties. GE showed antioxidant activity, as determined by the DPPH assay method. Chitosan and GE affect the degree of crystallinity up to 30% as the polysaccharide acts as a nucleating agent, while the extract reduces the mobility of PLA chains. The decomposition temperature was mainly affected by adding chitosan, with a reduction of up to 25 °C. The color of the blends was specially modified after the incorporation of both components, obtaining high values of b* and L* after the addition of chitosan, while GE switched to high values of a*. The elongation at break (EB) exhibited that the polysaccharide is mainly responsible for its reduction of around 50%. Slight differences were accessed in tensile strength and Young’s modulus, which were not statistically significant. Blends showed increased irregularities in their surface appearance, as observed by SEM analysis, corresponding to the partial miscibility of both polymers.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Material Engineering, Polymer Engineering, University of Kassel, Mönchebergstr. 3, 34125 Kassel, Germany.
- Physical Chemistry of Nanomaterials, Institute of Chemistry and Center for Interdisciplinary Nanostructure Science and Technology (CINSaT), University of Kassel, Heinich-Plett Straße 40, 34109 Kassel, Germany.
ORCID-Profile: Victoria Goetjes, Claudia L von Boyneburgk, Marilia M Horn
Förderung
- Center for Interdisciplinary Nanostructure Science and Technology, Universität Kassel
- CINSaT Seed Money from Universität Kassel
Zitieren
APA
Goetjes, V., von Boyneburgk, C. L., Heim, H. P., & Horn, M. M. (2023). Influence of Chitosan and Grape Seed Extract on Thermal and Mechanical Properties of PLA Blends. Polymers, 15(6), 1570. https://doi.org/10.3390/polym15061570
Vancouver
Goetjes V, von Boyneburgk CL, Heim HP, Horn MM. Influence of Chitosan and Grape Seed Extract on Thermal and Mechanical Properties of PLA Blends. Polymers. 2023;15(6):1570. doi:10.3390/polym15061570
BibTeX
@article{Goetjes2023,
author = {Goetjes, Victoria and von Boyneburgk, Claudia L and Heim, Hans-Peter and Horn, Marilia M},
title = {Influence of Chitosan and Grape Seed Extract on Thermal and Mechanical Properties of PLA Blends},
journal = {Polymers},
year = {2023},
volume = {15},
number = {6},
pages = {1570},
doi = {10.3390/polym15061570}
}
EUVIMED