Ultra-High Molecular Weight Polyethylene Modifications Produced by Carbon Nanotubes and Fe2O3 Nanoparticles
Polymers · 2023-02-25 · 15 (5) · 1169
DOI: 10.3390/polym15051169 ↗At a glance
Journal article in Polymers, published online on 2023-02-25. Written by Alfio Torrisi and 5 co-authors. Institution: Dipartimento Interateneo di Fisica, Università di Bari Aldo Moro, 70125 Bari, Italy. Cited 15 times so far (Crossref); 52 references. The full text is freely available (open access, CC BY 4.0). Funded by: OP RDE, MEYS, Czech Republic, Czech Science Foundation, University of Bari.
Abstract (original language)
Thin sheets of ultra-high molecular weight polyethylene (UHMWPE), both in pristine form and containing carbon nanotubes (CNTs) or Fe2O3 nanoparticles (NPs) at different concentrations, were prepared. The CNT and Fe2O3 NP weight percentages used ranged from 0.01% to 1%. The presence of CNTs and Fe2O3 NPs in UHMWPE was confirmed by transmission and scanning electron microscopy and by energy dispersive X-ray spectroscopy analysis (EDS). The effects of the embedded nanostructures on the UHMWPE samples were studied using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and UV–Vis absorption spectroscopy. The ATR-FTIR spectra show the characteristic features of the UHMWPE, CNTs, and Fe2O3. Concerning the optical properties, regardless of the type of embedded nanostructures, an increase in the optical absorption was observed. The allowed direct optical energy gap value was determined from the optical absorption spectra: in both cases, it decreases with increasing CNT or Fe2O3 NP concentrations. The obtained results will be presented and discussed.
Subjects
Author keywords
Authors and institutions
- Dipartimento Interateneo di Fisica, Università di Bari Aldo Moro, 70125 Bari, Italy.
- Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Bari, 70126 Bari, Italy.
- Department of Mathematics and Computer Sciences, Physical Sciences and Earth Sciences (MIFT), University of Messina, 98166 Messina, Italy.
- Nuclear Physics Institute of the CAS, Hlavní 130, 250 68 Husinec-Řež, Czech Republic.
- Department of Metals and Corrosion Engineering, University of Chemistry and Technology, 166 28 Prague, Czech Republic.
ORCID profiles: Alfio Torrisi, Lorenzo Torrisi, Mariapompea Cutroneo, Alena Michalcova, Milena D'Angelo, Letteria Silipigni
Funding
- OP RDE, MEYS, Czech Republic
- Czech Science Foundation
- University of Bari
Cite
APA
Torrisi, A., Torrisi, L., Cutroneo, M., Michalcova, A., D'Angelo, M., & Silipigni, L. (2023). Ultra-High Molecular Weight Polyethylene Modifications Produced by Carbon Nanotubes and Fe2O3 Nanoparticles. Polymers, 15(5), 1169. https://doi.org/10.3390/polym15051169
Vancouver
Torrisi A, Torrisi L, Cutroneo M, Michalcova A, D'Angelo M, Silipigni L. Ultra-High Molecular Weight Polyethylene Modifications Produced by Carbon Nanotubes and Fe2O3 Nanoparticles. Polymers. 2023;15(5):1169. doi:10.3390/polym15051169
BibTeX
@article{Torrisi2023,
author = {Torrisi, Alfio and Torrisi, Lorenzo and Cutroneo, Mariapompea and Michalcova, Alena and D'Angelo, Milena and Silipigni, Letteria},
title = {Ultra-High Molecular Weight Polyethylene Modifications Produced by Carbon Nanotubes and Fe2O3 Nanoparticles},
journal = {Polymers},
year = {2023},
volume = {15},
number = {5},
pages = {1169},
doi = {10.3390/polym15051169}
}
EUVIMED