EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultra-High Molecular Weight Polyethylene Modifications Produced by Carbon Nanotubes and Fe2O3 Nanoparticles

Alfio Torrisi iD, Lorenzo Torrisi iD, Mariapompea Cutroneo iD, Alena Michalcova iD, Milena D'Angelo iD, Letteria Silipigni iD

Polymers · 25.02.2023 · 15 (5) · 1169

DOI: 10.3390/polym15051169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.02.2023. Verfasst von Alfio Torrisi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Dipartimento Interateneo di Fisica, Università di Bari Aldo Moro, 70125 Bari, Italy. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: OP RDE, MEYS, Czech Republic, Czech Science Foundation, University of Bari.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thin sheets of ultra-high molecular weight polyethylene (UHMWPE), both in pristine form and containing carbon nanotubes (CNTs) or Fe2O3 nanoparticles (NPs) at different concentrations, were prepared. The CNT and Fe2O3 NP weight percentages used ranged from 0.01% to 1%. The presence of CNTs and Fe2O3 NPs in UHMWPE was confirmed by transmission and scanning electron microscopy and by energy dispersive X-ray spectroscopy analysis (EDS). The effects of the embedded nanostructures on the UHMWPE samples were studied using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and UV–Vis absorption spectroscopy. The ATR-FTIR spectra show the characteristic features of the UHMWPE, CNTs, and Fe2O3. Concerning the optical properties, regardless of the type of embedded nanostructures, an increase in the optical absorption was observed. The allowed direct optical energy gap value was determined from the optical absorption spectra: in both cases, it decreases with increasing CNT or Fe2O3 NP concentrations. The obtained results will be presented and discussed.

Schlagwörter

Stichwörter der Autor:innen

ATR-FTIRFe2O3 nanoparticlesUHMWPEUV–Viscarbon nanotubesenergy gap

Autor:innen und Institutionen

  • Dipartimento Interateneo di Fisica, Università di Bari Aldo Moro, 70125 Bari, Italy.
  • Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Bari, 70126 Bari, Italy.
  • Department of Mathematics and Computer Sciences, Physical Sciences and Earth Sciences (MIFT), University of Messina, 98166 Messina, Italy.
  • Nuclear Physics Institute of the CAS, Hlavní 130, 250 68 Husinec-Řež, Czech Republic.
  • Department of Metals and Corrosion Engineering, University of Chemistry and Technology, 166 28 Prague, Czech Republic.

ORCID-Profile: Alfio Torrisi, Lorenzo Torrisi, Mariapompea Cutroneo, Alena Michalcova, Milena D'Angelo, Letteria Silipigni

Förderung

  • OP RDE, MEYS, Czech Republic
  • Czech Science Foundation
  • University of Bari

Zitieren

APA

Torrisi, A., Torrisi, L., Cutroneo, M., Michalcova, A., D'Angelo, M., & Silipigni, L. (2023). Ultra-High Molecular Weight Polyethylene Modifications Produced by Carbon Nanotubes and Fe2O3 Nanoparticles. Polymers, 15(5), 1169. https://doi.org/10.3390/polym15051169

Vancouver

Torrisi A, Torrisi L, Cutroneo M, Michalcova A, D'Angelo M, Silipigni L. Ultra-High Molecular Weight Polyethylene Modifications Produced by Carbon Nanotubes and Fe2O3 Nanoparticles. Polymers. 2023;15(5):1169. doi:10.3390/polym15051169

BibTeX
@article{Torrisi2023,
  author = {Torrisi, Alfio and Torrisi, Lorenzo and Cutroneo, Mariapompea and Michalcova, Alena and D'Angelo, Milena and Silipigni, Letteria},
  title = {Ultra-High Molecular Weight Polyethylene Modifications Produced by Carbon Nanotubes and Fe2O3 Nanoparticles},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {5},
  pages = {1169},
  doi = {10.3390/polym15051169}
}
Kostenlos starten →