EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Aluminum Alloy Surface Roughness Through Nanosecond Pulse Laser Assisted by Continuous Laser Paint Removal

Jingyi Li, Rongfan Liang, Han Li, Junjie Liu, Jingdong Sun

Photonics · 06.06.2025 · 12 (6) · 575

DOI: 10.3390/photonics12060575 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 06.06.2025. Verfasst von Jingyi Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jilin Province Science and Technology Development Plan Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reducing surface roughness can enhance the mechanical properties of processed materials. The variation law of the aluminum alloy surface roughness induced by continuous-nanosecond combined laser (CL) with different continuous laser power densities and laser delay is investigated experimentally. A back propagation neural network (BPNN) coupled with a sparrow search algorithm (SSA) is employed to predict surface roughness. The nanosecond laser energy density, continuous laser power density and laser delay are input parameters, while the surface roughness is output parameter. The lowest surface roughness is achieved with completely paint film removed by the CL while the nanosecond laser energy density is 1.99 J/cm2, the continuous laser power density is 2118 W/cm2 and the laser delay is 1 ms. Compared to the original target and the target irradiated by nanosecond pulse laser (ns laser), the reductions in the surface roughness are 20.62% and 12.00%, respectively. The SSA-BPNN model demonstrates high prediction accuracy, with a correlation coefficient (R2) of 0.98628, root mean square error (RMSE) of 0.024, mean absolute error (MAE) of 0.020 and mean absolute percentage error (MAPE) of 1.30% on the test set. These results indicate that the SSA-BPNN demonstrates higher-precision surface roughness prediction with limited experimental data than BPNN. Furthermore, the findings confirm that the CL can effectively reduce surface roughness.

Förderung

  • Jilin Province Science and Technology Development Plan Project

Zitieren

APA

Li, J., Liang, R., Li, H., Liu, J., & Sun, J. (2025). Prediction of Aluminum Alloy Surface Roughness Through Nanosecond Pulse Laser Assisted by Continuous Laser Paint Removal. Photonics, 12(6), 575. https://doi.org/10.3390/photonics12060575

Vancouver

Li J, Liang R, Li H, Liu J, Sun J. Prediction of Aluminum Alloy Surface Roughness Through Nanosecond Pulse Laser Assisted by Continuous Laser Paint Removal. Photonics. 2025;12(6):575. doi:10.3390/photonics12060575

BibTeX
@article{Li2025,
  author = {Li, Jingyi and Liang, Rongfan and Li, Han and Liu, Junjie and Sun, Jingdong},
  title = {Prediction of Aluminum Alloy Surface Roughness Through Nanosecond Pulse Laser Assisted by Continuous Laser Paint Removal},
  journal = {Photonics},
  year = {2025},
  volume = {12},
  number = {6},
  pages = {575},
  doi = {10.3390/photonics12060575}
}
Kostenlos starten →