EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation and Experimental Study on Continuous Wave Fiber Laser Removal of Epoxy Resin Paint Film on the Surface of 6061 Aluminum Alloy

Yahui Li, Jingyi Li, Hang Dong, Wei Zhang, Guangyong Jin

Photonics · 17.01.2024 · 11 (1) · 82

DOI: 10.3390/photonics11010082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 17.01.2024. Verfasst von Yahui Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Changchun Science and Technology Development Plan, Jilin Provincial Department of Education Science and Technology Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Paint removal is an essential process in the industrial field. Laser technology provides an effective method of paint removal to replace traditional mechanical and chemical methods. This paper establishes a continuous wave (CW) laser thermal paint removal model based on heat conduction theory and Arrhenius’ law. The paint stripping process of epoxy paint film on the surface of 6061 aluminum alloy via CW laser was studied through simulation and experiment. We found that the carbonization of the paint film during the CW laser paint removal process will inhibit the laser paint removal process. Therefore, the paint removal efficiency of the CW laser is limited. The depth of CW laser paint removal increases linearly with the CW laser power density. However, during the CW laser paint removal process, due to the pyrolysis of the paint film and the reflection of the laser by the substrate, the surface temperature of the material first increases and then decreases. In addition, after laser paint removal, the surface roughness of the material after paint removal is reduced due to the melting of the base material. The model established in this article can provide a theoretical reference for studying the CW laser paint removal process.

Förderung

  • National Natural Science Foundation of China
  • Changchun Science and Technology Development Plan
  • Jilin Provincial Department of Education Science and Technology Research

Zitieren

APA

Li, Y., Li, J., Dong, H., Zhang, W., & Jin, G. (2024). Simulation and Experimental Study on Continuous Wave Fiber Laser Removal of Epoxy Resin Paint Film on the Surface of 6061 Aluminum Alloy. Photonics, 11(1), 82. https://doi.org/10.3390/photonics11010082

Vancouver

Li Y, Li J, Dong H, Zhang W, Jin G. Simulation and Experimental Study on Continuous Wave Fiber Laser Removal of Epoxy Resin Paint Film on the Surface of 6061 Aluminum Alloy. Photonics. 2024;11(1):82. doi:10.3390/photonics11010082

BibTeX
@article{Li2024,
  author = {Li, Yahui and Li, Jingyi and Dong, Hang and Zhang, Wei and Jin, Guangyong},
  title = {Simulation and Experimental Study on Continuous Wave Fiber Laser Removal of Epoxy Resin Paint Film on the Surface of 6061 Aluminum Alloy},
  journal = {Photonics},
  year = {2024},
  volume = {11},
  number = {1},
  pages = {82},
  doi = {10.3390/photonics11010082}
}
Kostenlos starten →