EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Nanocarbon on the Structural and Mechanical Properties of 6061 Aluminum Composites by Powder Metallurgy

Wilson Rativa-Parada, Hansika I Sirikumara, Robinson Karunanithy, Poopalasingam Sivakumar iD, Thushari Jayasekera, Sabrina Nilufar

Nanomaterials · 08.11.2023 · 13 (22) · 2917

DOI: 10.3390/nano13222917 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 08.11.2023. Verfasst von Wilson Rativa-Parada und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical, Aerospace, and Materials Engineering, Southern Illinois University, Carbondale, IL 62901, USA. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, National Science Foundation Engineering Research Initiation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

6061 aluminum composites with 0.5 and 1 vol. % graphene nanoplatelets as well as 1 and 2 vol. % activated nanocarbon were manufactured by a powder metallurgy method. Scanning electron microscopy and Raman spectroscopy were used to study the morphology, structure, and distribution of nanocarbon reinforcements in the composite samples. Density Functional Theory (DFT) calculations were performed to understand the aluminum-carbon bonding and the effects of hybridized networks of carbon atoms on nanocarbon aluminum matrix composites. Scanning electron microscopy showed the good distribution and low agglomeration tendencies of nanoparticles in the composites. The formation of secondary phases at the materials interface was not detected in the hot-pressed composites. Raman spectroscopy showed structural changes in the reinforced composites after the manufacturing process. The results from Density Functional Theory calculations suggest that it is thermodynamically possible to form carbon rings in the aluminum matrix, which may be responsible for the improved mechanical strength. Our results also suggest that these carbon networks are graphene-like, which also agrees with the Raman spectroscopy data. Micro-Vickers hardness and compressive tests were used to determine the mechanical properties of the samples. Composites presented enhanced hardness, yield and ultimate strength compared to the 6061 aluminum alloy with no nanocarbon reinforcement. Ductility was also affected, as shown by the reduction in elongation and by the number of dimples in the fractured surfaces of the materials.

Schlagwörter

Stichwörter der Autor:innen

activated nanocarbongraphene nanoplateletsmicro-Vickers hardnessnanocarbon–aluminum composites

Autor:innen und Institutionen

  • School of Mechanical, Aerospace, and Materials Engineering, Southern Illinois University, Carbondale, IL 62901, USA.
  • E. S. Witchger School of Engineering, Marian University, Indianapolis, IN 46222, USA.
  • School of Physics and Applied Physics, Southern Illinois University, Carbondale, IL 62901, USA.

ORCID-Profile: Poopalasingam Sivakumar

Förderung

  • National Science Foundation
  • National Science Foundation Engineering Research Initiation

Zitieren

APA

Rativa-Parada, W., Sirikumara, H. I., Karunanithy, R., Sivakumar, P., Jayasekera, T., & Nilufar, S. (2023). Effect of Nanocarbon on the Structural and Mechanical Properties of 6061 Aluminum Composites by Powder Metallurgy. Nanomaterials, 13(22), 2917. https://doi.org/10.3390/nano13222917

Vancouver

Rativa-Parada W, Sirikumara HI, Karunanithy R, Sivakumar P, Jayasekera T, Nilufar S. Effect of Nanocarbon on the Structural and Mechanical Properties of 6061 Aluminum Composites by Powder Metallurgy. Nanomaterials. 2023;13(22):2917. doi:10.3390/nano13222917

BibTeX
@article{RativaParada2023,
  author = {Rativa-Parada, Wilson and Sirikumara, Hansika I and Karunanithy, Robinson and Sivakumar, Poopalasingam and Jayasekera, Thushari and Nilufar, Sabrina},
  title = {Effect of Nanocarbon on the Structural and Mechanical Properties of 6061 Aluminum Composites by Powder Metallurgy},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {22},
  pages = {2917},
  doi = {10.3390/nano13222917}
}
Kostenlos starten →