EUVIMEDEUVIMED entdecken
Crossref

Wear behavior of aluminum/MWCNT/nanoclay hybrid composites fabricated by powder metallurgy

Reza Jaraemi, Abdolvahed Kami

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 28.05.2026

DOI: 10.1177/09544089261454876 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 28.05.2026. Verfasst von Reza Jaraemi und 1 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum matrix nanocomposites reinforced with carbon nanotubes have attracted increasing interest for lightweight tribological applications; however, achieving a uniform nanotube dispersion remains a critical challenge. In this study, Al/MWCNT/nanoclay hybrid composites were fabricated via powder metallurgy followed by spark plasma sintering (SPS) to investigate the role of nanoclay as a secondary reinforcement and dispersion aid for MWCNTs. A constant MWCNT content of 1 wt.% was combined with varying nanoclay additions (0.5, 1, and 1.5 wt.%). Microstructural characterization revealed that an optimal nanoclay content of 1 wt.% effectively suppressed MWCNT agglomeration and promoted a more homogeneous reinforcement distribution within the aluminum matrix. The optimized composite exhibited a Vickers hardness of approximately 75.9 HV and achieved about a 2.5-fold improvement in wear resistance compared with pure aluminum. In contrast, excessive nanoclay addition (1.5 wt.%) resulted in reduced hardness and inferior wear performance. Overall, the results demonstrate that controlled nanoclay incorporation provides an effective strategy for enhancing the tribological performance of CNT-reinforced aluminum composites.

Zitieren

APA

Jaraemi, R., & Kami, A. (2026). Wear behavior of aluminum/MWCNT/nanoclay hybrid composites fabricated by powder metallurgy. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261454876

Vancouver

Jaraemi R, Kami A. Wear behavior of aluminum/MWCNT/nanoclay hybrid composites fabricated by powder metallurgy. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261454876

BibTeX
@article{Jaraemi2026,
  author = {Jaraemi, Reza and Kami, Abdolvahed},
  title = {Wear behavior of aluminum/MWCNT/nanoclay hybrid composites fabricated by powder metallurgy},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261454876}
}
Kostenlos starten →