Mechanical and tribological properties of carbon fibers and SiC particles hybrid reinforced aluminum matrix composites fabricated by powder metallurgy
Journal of Composite Materials · 15.06.2026
DOI: 10.1177/00219983261461360 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 15.06.2026. Verfasst von Yiping Lv und 9 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Gefördert von: Jilin Scientific and Technological Development Program, National Natural Science Foundation of China.
Abstract (Originalsprache)
In this study, hybrid aluminum (Al) matrix composites reinforced with copper-coated carbon fibers and SiC particles (SiC p -Cu@CF/Al composites) were manufactured by the powder metallurgy method. With the carbon fiber mass fraction fixed at 1 wt%, the effect of SiC particle mass fraction on the microstructure and properties of the composite was systematically investigated. The results indicated that with the addition of 3 wt% SiC particles, the SiC p -Cu@CF/Al composite exhibited a hardness of 73.47 HB and a tensile strength of 344.38 MPa, which were 30.6% and 22.1% higher than those of the copper-coated carbon fiber reinforced aluminum matrix (Cu@CF/Al) composite, respectively. Meanwhile, the composite demonstrated an average friction coefficient of 0.4526 and a wear rate of 0.93 × 10 -2 mm 3 /N·m, representing reductions of 42.7% and 66.6%, respectively. Carbon fibers enhanced the tensile strength primarily through axial load-bearing, while SiC particles improved the hardness and wear resistance via dispersion strengthening and grain refinement. The synergistic effect of these two reinforcements, aided by a graded stress distribution at the interface that inhibited crack propagation, led to a complementary improvement in the overall mechanical and tribological properties. This work provides a systematic understanding of the synergistic strengthening and wear-resistance mechanisms of SiC p -Cu@CF/Al composites fabricated by powder metallurgy, and identifies an optimized SiC particle content for achieving balanced mechanical and tribological performance.
Förderung
- Jilin Scientific and Technological Development Program
- National Natural Science Foundation of China
Zitieren
APA
Lv, Y., Zou, H., Mei, C., Ye, H., Xiao, P., Jia, S., Zhu, W., Han, Y., Zhou, S., & Ran, X. (2026). Mechanical and tribological properties of carbon fibers and SiC particles hybrid reinforced aluminum matrix composites fabricated by powder metallurgy. Journal of Composite Materials. https://doi.org/10.1177/00219983261461360
Vancouver
Lv Y, Zou H, Mei C, Ye H, Xiao P, Jia S, et al. Mechanical and tribological properties of carbon fibers and SiC particles hybrid reinforced aluminum matrix composites fabricated by powder metallurgy. Journal of Composite Materials. 2026. doi:10.1177/00219983261461360
BibTeX
@article{Lv2026,
author = {Lv, Yiping and Zou, Haohao and Mei, Chenyang and Ye, Huadong and Xiao, Puyuan and Jia, Suqiu and Zhu, Weiwei and Han, Ying and Zhou, Shengjian and Ran, Xu},
title = {Mechanical and tribological properties of carbon fibers and SiC particles hybrid reinforced aluminum matrix composites fabricated by powder metallurgy},
journal = {Journal of Composite Materials},
year = {2026},
doi = {10.1177/00219983261461360}
}
EUVIMED