The Effect of Cooling Rates on Thermal, Crystallization, Mechanical and Barrier Properties of Rotational Molding Polyamide 11 as the Liner Material for High-Capacity High-Pressure Vessels
Molecules · 2023-03-07 · 28 (6) · 2425
DOI: 10.3390/molecules28062425 ↗At a glance
Journal article in Molecules, published online on 2023-03-07. Written by Muhuo Yu and 6 co-authors. Institution: State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Sha…. Cited 32 times so far (Crossref); 51 references. The full text is freely available (open access, CC BY 4.0). Funded by: Zeyu Sun, Muhuo Yu, State Key Laboratory of Fiber Material Modification.
Abstract (original language)
The rapid development of hydrogen fuel cells has been paralleled by increased demand for lightweight type IV hydrogen storage vessels with high hydrogen storage density, which raises the performance requirements of internal plastic liners. An appropriate manufacturing process is important to improve the quality of polymer liners. In this paper, DSC, WAXD, a universal testing machine and a differential pressure gas permeameter were used to investigate the effect of the cooling rate of the rotational molding polyamide 11 on the thermal, crystallization, mechanical and barrier properties. The cooling rate is formulated according to the cooling rate that can be achieved in actual production. The results suggest that two PA11 liner materials initially exhibited two-dimensional (circular) growth under non-isothermal crystallization conditions and shifted to one-dimensional space growth due to spherulite collision and crowding during the secondary crystallization stage. The slower the cooling process, the greater the crystallinity of the specimen. The increase in crystallinity significantly improved the barrier properties of the two PA11 liner materials, and the gas permeability coefficient was 2-3-fold higher than at low crystallinity. Moreover, the tensile strength, the tensile modulus, the flexural strength, and the flexural modulus increased, and the elongation at break decreased as the crystallinity increased.
Subjects
Author keywords
Authors and institutions
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
- Center for Civil Aviation Composites, Shanghai Key Laboratory of Lightweight Structural Composites, Donghua University, Shanghai 201620, China.
ORCID profiles: Zeyu Sun
Funding
- Zeyu Sun
- Muhuo Yu
- State Key Laboratory of Fiber Material Modification
- Science and Technology Committee of Shanghai Municipality
- Fundamental Research Funds for the Central Universities
Cite
APA
Yu, M., Qi, L., Cheng, L., Min, W., Mei, Z., Gao, R., & Sun, Z. (2023). The Effect of Cooling Rates on Thermal, Crystallization, Mechanical and Barrier Properties of Rotational Molding Polyamide 11 as the Liner Material for High-Capacity High-Pressure Vessels. Molecules, 28(6), 2425. https://doi.org/10.3390/molecules28062425
Vancouver
Yu M, Qi L, Cheng L, Min W, Mei Z, Gao R, et al. The Effect of Cooling Rates on Thermal, Crystallization, Mechanical and Barrier Properties of Rotational Molding Polyamide 11 as the Liner Material for High-Capacity High-Pressure Vessels. Molecules. 2023;28(6):2425. doi:10.3390/molecules28062425
BibTeX
@article{Yu2023,
author = {Yu, Muhuo and Qi, Liangliang and Cheng, Lele and Min, Wei and Mei, Zhonghao and Gao, Ruize and Sun, Zeyu},
title = {The Effect of Cooling Rates on Thermal, Crystallization, Mechanical and Barrier Properties of Rotational Molding Polyamide 11 as the Liner Material for High-Capacity High-Pressure Vessels},
journal = {Molecules},
year = {2023},
volume = {28},
number = {6},
pages = {2425},
doi = {10.3390/molecules28062425}
}
EUVIMED