EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Cooling Rates on Thermal, Crystallization, Mechanical and Barrier Properties of Rotational Molding Polyamide 11 as the Liner Material for High-Capacity High-Pressure Vessels

Muhuo Yu, Liangliang Qi, Lele Cheng, Wei Min, Zhonghao Mei, Ruize Gao, Zeyu Sun iD

Molecules · 07.03.2023 · 28 (6) · 2425

DOI: 10.3390/molecules28062425 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 07.03.2023. Verfasst von Muhuo Yu und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Sha…. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zeyu Sun, Muhuo Yu, State Key Laboratory of Fiber Material Modification.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid development of hydrogen fuel cells has been paralleled by increased demand for lightweight type IV hydrogen storage vessels with high hydrogen storage density, which raises the performance requirements of internal plastic liners. An appropriate manufacturing process is important to improve the quality of polymer liners. In this paper, DSC, WAXD, a universal testing machine and a differential pressure gas permeameter were used to investigate the effect of the cooling rate of the rotational molding polyamide 11 on the thermal, crystallization, mechanical and barrier properties. The cooling rate is formulated according to the cooling rate that can be achieved in actual production. The results suggest that two PA11 liner materials initially exhibited two-dimensional (circular) growth under non-isothermal crystallization conditions and shifted to one-dimensional space growth due to spherulite collision and crowding during the secondary crystallization stage. The slower the cooling process, the greater the crystallinity of the specimen. The increase in crystallinity significantly improved the barrier properties of the two PA11 liner materials, and the gas permeability coefficient was 2-3-fold higher than at low crystallinity. Moreover, the tensile strength, the tensile modulus, the flexural strength, and the flexural modulus increased, and the elongation at break decreased as the crystallinity increased.

Schlagwörter

Stichwörter der Autor:innen

crystallinitygas barrier propertiespolyamide 11polymer liner of type IV hydrogen storage vesselrotational molding

Autor:innen und Institutionen

  • State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
  • Center for Civil Aviation Composites, Shanghai Key Laboratory of Lightweight Structural Composites, Donghua University, Shanghai 201620, China.

ORCID-Profile: Zeyu Sun

Förderung

  • Zeyu Sun
  • Muhuo Yu
  • State Key Laboratory of Fiber Material Modification
  • Science and Technology Committee of Shanghai Municipality
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Yu, M., Qi, L., Cheng, L., Min, W., Mei, Z., Gao, R., & Sun, Z. (2023). The Effect of Cooling Rates on Thermal, Crystallization, Mechanical and Barrier Properties of Rotational Molding Polyamide 11 as the Liner Material for High-Capacity High-Pressure Vessels. Molecules, 28(6), 2425. https://doi.org/10.3390/molecules28062425

Vancouver

Yu M, Qi L, Cheng L, Min W, Mei Z, Gao R, et al. The Effect of Cooling Rates on Thermal, Crystallization, Mechanical and Barrier Properties of Rotational Molding Polyamide 11 as the Liner Material for High-Capacity High-Pressure Vessels. Molecules. 2023;28(6):2425. doi:10.3390/molecules28062425

BibTeX
@article{Yu2023,
  author = {Yu, Muhuo and Qi, Liangliang and Cheng, Lele and Min, Wei and Mei, Zhonghao and Gao, Ruize and Sun, Zeyu},
  title = {The Effect of Cooling Rates on Thermal, Crystallization, Mechanical and Barrier Properties of Rotational Molding Polyamide 11 as the Liner Material for High-Capacity High-Pressure Vessels},
  journal = {Molecules},
  year = {2023},
  volume = {28},
  number = {6},
  pages = {2425},
  doi = {10.3390/molecules28062425}
}
Kostenlos starten →