Biofilm-Associated Viable Cell Recovery of Streptococcus salivarius K12 and M18 Probiotic Strains on Conventional, CAD/CAM-Milled, and 3D-Printed Denture Base Materials: An In Vitro Microbiological Study
Microorganisms · 14.11.2026 · 14 (11) · 2645
DOI: 10.3390/microorganisms14112645 ↗Kurz gefasst
Fachartikel in der Zeitschrift Microorganisms, online erschienen am 14.11.2026. Verfasst von Sarah Almuhayya und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University.
Abstract (Originalsprache)
This in vitro study evaluated 48-h biofilm-associated viable cell recovery of Streptococcus salivarius BLIS K12 and M18 on conventionally heat polymerized (CV), CAD/CAM-milled (ML), and 3D-printed (PR) denture base materials and examined the associations between probiotic biofilm-associated viable CFU recovery, qualitatively visualized live/dead fluorescence patterns and material surface characteristics. Eighty-seven disc-shaped specimens were fabricated from three denture base materials and characterized for surface roughness (Ra), contact angle (CA; n = 20 per material), and surface morphology (n = 1). Following salivary pellicle formation, specimens (n = 14 per material–strain group) were inoculated separately with standardized suspensions of S. salivarius K12 or M18 and incubated for 48 h. After 48 h of incubation, biofilm-associated viable cells were quantified by CFU enumeration and expressed as log10 CFU/mm2, while live/dead fluorescence patterns and biofilm distribution were qualitatively assessed using confocal laser scanning microscopy (CLSM). The effects of denture base material, probiotic strain, and their interaction on biofilm-associated viable cell recovery were evaluated using a heteroscedasticity-robust factorial model with HC3 standard errors. Associations between surface properties and biofilm-associated viable cell recovery were assessed separately for each strain using Spearman’s rank correlation and multiple linear regression. Surface roughness and contact angle differed significantly among the three materials (p < 0.001 and p = 0.019, respectively). Biofilm-associated viable cell recovery was significantly affected by denture base material and probiotic strain, with a significant material × strain interaction (all p < 0.001). K12 recovery was significantly lower on CV than on ML and PR, whereas M18 recovery was significantly higher on ML than on CV and PR. K12 exhibited significantly greater recovery than M18 on PR (p < 0.001), while no significant strain-dependent differences were observed on CV or ML. Exploratory correlation analysis revealed a modest inverse association between K12 recovery and CA (ρ = −0.367, unadjusted p = 0.046), which was not statistically significant after Holm correction for multiple comparisons (adjusted p = 0.184). No significant correlations were observed between Ra and recovery for either strain or between CA and M18 recovery. Multiple regression models incorporating both surface characteristics were not statistically significant for either strain. Forty-eight-hour biofilm-associated viable cell recovery of S. salivarius K12 and M18 was material- and strain-dependent, with the most pronounced strain-specific difference observed on PR. Surface roughness and wettability alone did not consistently explain the observed differences in viable cell recovery. These findings highlight the importance of considering both probiotic strain and denture base material when investigating probiotic–denture interactions.
Förderung
- King Saud University
Zitieren
APA
Almuhayya, S., Babaier, R., Aldehalan, F., Alnemari, H., & Somily, A. M. (2026). Biofilm-Associated Viable Cell Recovery of Streptococcus salivarius K12 and M18 Probiotic Strains on Conventional, CAD/CAM-Milled, and 3D-Printed Denture Base Materials: An In Vitro Microbiological Study. Microorganisms, 14(11), 2645. https://doi.org/10.3390/microorganisms14112645
Vancouver
Almuhayya S, Babaier R, Aldehalan F, Alnemari H, Somily AM. Biofilm-Associated Viable Cell Recovery of Streptococcus salivarius K12 and M18 Probiotic Strains on Conventional, CAD/CAM-Milled, and 3D-Printed Denture Base Materials: An In Vitro Microbiological Study. Microorganisms. 2026;14(11):2645. doi:10.3390/microorganisms14112645
BibTeX
@article{Almuhayya2026,
author = {Almuhayya, Sarah and Babaier, Rua and Aldehalan, Faye and Alnemari, Hammad and Somily, Ali M.},
title = {Biofilm-Associated Viable Cell Recovery of Streptococcus salivarius K12 and M18 Probiotic Strains on Conventional, CAD/CAM-Milled, and 3D-Printed Denture Base Materials: An In Vitro Microbiological Study},
journal = {Microorganisms},
year = {2026},
volume = {14},
number = {11},
pages = {2645},
doi = {10.3390/microorganisms14112645}
}
EUVIMED