Experimental Study on Slicing Sapphire Crystal with Ultrasonic-Assisted Diamond Wire Saw
Micromachines · 22.07.2026 · 17 (7) · 867
DOI: 10.3390/mi17070867 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 22.07.2026. Verfasst von Faroug Ismael und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, School of Mechanical Engineering, Shandong University, J…. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province,China, Natural Science Foundation of Shandong Province.
Abstract (Originalsprache)
Sapphire crystal, owing to its high hardness, chemical inertness, thermal stability, optical transparency, and superior dielectric strength, as well as resistance to scratching, abrasion, friction, and wear, is widely utilized in a broad range of engineering applications. Slicing is the most critical step in sapphire industry processing, as it largely dictates the final surface quality and morphology. Conventional wire sawing methods often lead to undesirable surface defects, while ultrasonic-assisted diamond wire sawing (UADWS) offers potential advantages through enhanced abrasive self-sharpening, micro-hammering, and improved lubricant penetration. However, its influence on sapphire slicing remains insufficiently studied. This study investigates the effects of UADWS parameters—ultrasonic amplitude, horn application position, feed speed, and wire speed—on the surface quality of sapphire crystals. Both single-factor and orthogonal five-level experiments were designed, taking wire and feed speed within industrial parameter ranges. Surface roughness (Ra) and waviness peak–valley (PV) difference were used as evaluation indices, and range and variance analyses were performed. In addition, power regression models were developed to predict Ra and PV under varying conditions. The surface morphology results from single-factor experiments reveal that increasing feed speed and wire speed reduces the effectiveness of ultrasonic assistance, while application horn position exerts only a minor influence. Overall, orthogonal analysis confirmed that the relative influence of process parameters on surface quality follows the order: feed speed > wire speed > amplitude > application horn position. These findings establish a foundation for optimizing the sawing and ultrasonic parameters of UADWS to enhance sapphire surface quality, reduce downstream processing requirements, and clarify the importance of controlling feed speed and wire speed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China.
- Department of Mechanical Engineering, College of Engineering Science, Nyala University, Nyala 63311, Sudan.
- State Key Laboratory of Advanced Equipment and Technology for Metal Forming, Shandong University, Jinan 250061, China.
ORCID-Profile: Pengfei Sun
Förderung
- Natural Science Foundation of Shandong Province,China
- Natural Science Foundation of Shandong Province
Zitieren
APA
Ismael, F., Sun, P., Liu, Y., Li, H., & Gao, Y. (2026). Experimental Study on Slicing Sapphire Crystal with Ultrasonic-Assisted Diamond Wire Saw. Micromachines, 17(7), 867. https://doi.org/10.3390/mi17070867
Vancouver
Ismael F, Sun P, Liu Y, Li H, Gao Y. Experimental Study on Slicing Sapphire Crystal with Ultrasonic-Assisted Diamond Wire Saw. Micromachines. 2026;17(7):867. doi:10.3390/mi17070867
BibTeX
@article{Ismael2026,
author = {Ismael, Faroug and Sun, Pengfei and Liu, Yihe and Li, Honghao and Gao, Yufei},
title = {Experimental Study on Slicing Sapphire Crystal with Ultrasonic-Assisted Diamond Wire Saw},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {7},
pages = {867},
doi = {10.3390/mi17070867}
}
EUVIMED