Wire Bow In Situ Measurement for Monitoring the Evolution of Sawing Capability of Diamond Wire Saw during Slicing Sapphire
Materials · 02.05.2024 · 17 (9) · 2134
DOI: 10.3390/ma17092134 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.05.2024. Verfasst von Zixing Yang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the financial supports from the Major Science and Technology Projects in Henan Province, the Changjiang Scholars and Innovative Research Team in University, the 111 Project.
Abstract (Originalsprache)
Electroplated diamond wire sawing is widely used as a processing method to cut hard and brittle difficult-to-machine materials. Currently, obtaining the sawing capability of diamond wire saw through the wire bow is still difficult. In this paper, a method for calculating the sawing capability of diamond wire saw in real-time based on the wire bow is proposed. The influence of the renewed length per round trip, crystal orientation of sapphire, wire speed, and feed rate on the wire sawing capability has been revealed via slicing experiments. The results indicate that renewing the diamond wire saw, and reducing the wire speed and feed rate can delay the reduction in sawing capability. Furthermore, controlling the value of renewed length per round trip can make the diamond wire saw enter a stable cutting state, in which the capability of the wire saw no longer decreases. The sawing capability of diamond wire saw cutting in the A-plane of the sapphire is smaller than that of the C-plane, and a suitable feed rate or wire speed within the range of sawing parameters studied in this study can avoid a rapid decrease in the sawing capability of the wire saw during the cutting process. The knowledge obtained in this study provides a theoretical basis for monitoring the performance of the wire saw, and guidance for the wire cutting process in semiconductor manufacturing. In the future, it may even be possible to provide real-time performance parameters of diamond wire saw for the digital twin model of wire sawing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021, China.
- College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China.
- Collaborative Innovation Center of Advanced Manufacturing Technology and Equipment for Stone Industry, Xiamen 361021, China.
- State Key Laboratory for High Performance Tools, Zhengzhou Research Institute for Abrasives & Grinding Co., Ltd., Zhengzhou 450001, China.
ORCID-Profile: Hui Huang
Förderung
- the financial supports from the Major Science and Technology Projects in Henan Province
- the Changjiang Scholars and Innovative Research Team in University
- the 111 Project
- the Natural Science Foundation of Fujian Province
- financial supports from the Major Science and Technology Projects in Henan Province
- Changjiang Scholars and Innovative Research Team in University
- Natural Science Foundation of Fujian Province
Zitieren
APA
Yang, Z., Huang, H., Liao, X., Lai, Z., Xu, Z., & Zhao, Y. (2024). Wire Bow In Situ Measurement for Monitoring the Evolution of Sawing Capability of Diamond Wire Saw during Slicing Sapphire. Materials, 17(9), 2134. https://doi.org/10.3390/ma17092134
Vancouver
Yang Z, Huang H, Liao X, Lai Z, Xu Z, Zhao Y. Wire Bow In Situ Measurement for Monitoring the Evolution of Sawing Capability of Diamond Wire Saw during Slicing Sapphire. Materials. 2024;17(9):2134. doi:10.3390/ma17092134
BibTeX
@article{Yang2024,
author = {Yang, Zixing and Huang, Hui and Liao, Xinjiang and Lai, Zhiyuan and Xu, Zhiteng and Zhao, Yanjun},
title = {Wire Bow In Situ Measurement for Monitoring the Evolution of Sawing Capability of Diamond Wire Saw during Slicing Sapphire},
journal = {Materials},
year = {2024},
volume = {17},
number = {9},
pages = {2134},
doi = {10.3390/ma17092134}
}
EUVIMED