Experimental Research on the Supply of Working Fluid for Fixed Diamond Wire Slicing Based on Ultrasonic Capillary Effect
Micromachines · 13.07.2024 · 15 (7) · 910
DOI: 10.3390/mi15070910 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 13.07.2024. Verfasst von Junying Zhao und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical and Electrical Engineering, Luoyang Polytechnic, Luoyang 471942, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation.
Abstract (Originalsprache)
Thin wafers and thin wires are beneficial to the photovoltaic industry for reducing costs, increasing efficiency, and reducing the cost of electricity generation. It is a development trend in solar silicon wafer cutting. Thin wire cutting reduces the kerf between silicon wafers to less than 50 μm. Therefore, it is extremely difficult to supply cutting fluid to the cutting area. And this affects cutting performance. This paper proposes the use of the capillary effect produced by ultrasonic waves in fixed diamond wire slicing to improve the cutting fluid supply and reduce wafer adsorption. To explore the rules of ultrasonic capillary action between two plates and guide the industrial applications, the effects of the distance between parallel plates, the distance from the bottom of the parallel plates to the ultrasonic radiation surface, the non-parallelism between the plates, the temperature of the working fluid, the ultrasonic action time, and the type of working fluid on the liquid level rise height were studied. The conclusions can be used to guide the improvement of the supply of working fluid in fixed diamond wire slicing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical and Electrical Engineering, Luoyang Polytechnic, Luoyang 471942, China.
- College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
Förderung
- China Postdoctoral Science Foundation
Zitieren
APA
Zhao, J., Shen, L., Zhang, C., & Wang, Y. (2024). Experimental Research on the Supply of Working Fluid for Fixed Diamond Wire Slicing Based on Ultrasonic Capillary Effect. Micromachines, 15(7), 910. https://doi.org/10.3390/mi15070910
Vancouver
Zhao J, Shen L, Zhang C, Wang Y. Experimental Research on the Supply of Working Fluid for Fixed Diamond Wire Slicing Based on Ultrasonic Capillary Effect. Micromachines. 2024;15(7):910. doi:10.3390/mi15070910
BibTeX
@article{Zhao2024,
author = {Zhao, Junying and Shen, Luqi and Zhang, Chunwei and Wang, Yanqing},
title = {Experimental Research on the Supply of Working Fluid for Fixed Diamond Wire Slicing Based on Ultrasonic Capillary Effect},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {7},
pages = {910},
doi = {10.3390/mi15070910}
}
EUVIMED