EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Paper Microfluidic Chips via Wax Soft Lithography

Xinyi Chen iD, Jie Zhou, Jiahua Zhong, Zitong Ye, Qinghao He, Hao Chen, Weijin Guo iD

Micromachines · 23.04.2026 · 17 (5) · 512

DOI: 10.3390/mi17050512 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.04.2026. Verfasst von Xinyi Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Shantou University, Shantou 515063, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Department of Education of Guangdong Province, Shantou University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Paper-based microfluidic devices (μPADs) have attracted significant attention for point-of-care testing (POCT), environmental monitoring, and food safety due to their low cost, ease of use, and minimal instrument dependence. However, fabricating high-resolution and reproducible microchannels on paper remains challenging. Conventional methods such as wax printing, photolithography, and inkjet printing are limited by resolution or equipment cost. Here, we present a low-cost, high-resolution fabrication method for μPADs, termed wax soft lithography, which combines wax printing with soft lithography. Through this method, microchannels with a minimum width of 234 ± 62 μm were consistently produced, and complex patterns were successfully fabricated, demonstrating high precision and reproducibility. As a proof-of-concept demonstration of device functionality, the fabricated μPADs were used to detect glucose in spiked urine samples, showing a concentration-dependent colorimetric response. This method provides an effective route for rapid production of high-resolution μPADs in resource-limited settings. With further validation before practical applications, this method shows promise for future development in POCT.

Schlagwörter

Stichwörter der Autor:innen

POCTglucosepaper microfluidicssoft lithographywax patterning

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Shantou University, Shantou 515063, China.

ORCID-Profile: Xinyi Chen, Weijin Guo

Förderung

  • National Natural Science Foundation of China
  • Department of Education of Guangdong Province
  • Shantou University
  • Guangdong Basic and Applied Basic Research Foundation
  • Bureau of Education of Foshan City

Zitieren

APA

Chen, X., Zhou, J., Zhong, J., Ye, Z., He, Q., Chen, H., & Guo, W. (2026). Fabrication of Paper Microfluidic Chips via Wax Soft Lithography. Micromachines, 17(5), 512. https://doi.org/10.3390/mi17050512

Vancouver

Chen X, Zhou J, Zhong J, Ye Z, He Q, Chen H, et al. Fabrication of Paper Microfluidic Chips via Wax Soft Lithography. Micromachines. 2026;17(5):512. doi:10.3390/mi17050512

BibTeX
@article{Chen2026,
  author = {Chen, Xinyi and Zhou, Jie and Zhong, Jiahua and Ye, Zitong and He, Qinghao and Chen, Hao and Guo, Weijin},
  title = {Fabrication of Paper Microfluidic Chips via Wax Soft Lithography},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {5},
  pages = {512},
  doi = {10.3390/mi17050512}
}
Kostenlos starten →