EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Omega-Shaped Microwells via OSTE Single-Step Lithography

Jiahua Zhong, Haonan Li, Xinyi Chen, Hao Chen, Dinghui Chen, Guanchong Wu, Lok Ting Chu, Weijin Guo

Micromachines · 30.10.2026 · 17 (11) · 1262

DOI: 10.3390/mi17111262 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 30.10.2026. Verfasst von Jiahua Zhong und 7 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation, Department of Education of Guangdong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Curved microwells have become increasingly important in three-dimensional (3D) cell culture because their concave geometry better represents the native cellular microenvironment, promotes spontaneous cell aggregation, and supports tissue-like organization compared to conventional flat substrates. However, traditional fabrication of such curved microwells often relies on complex, multistep processes that require cleanroom facilities, customized masks, or specialized equipment. Here, we present a simple, cost-effective, and single-step lithographic method using off-stoichiometry thiol-ene (OSTE) polymer to produce micropillar arrays with omega (Ω)-shaped tops, which serve as masters for replica-molding polydimethylsiloxane (PDMS) microwells. Our approach uses a porous, carbon-loaded PDMS membrane templated from processor pins as a combined mold and light-shielding layer. OSTE precursor is filled into the membrane pores and cured under a single diffused UV exposure through a glass diffuser, simultaneously forming both the pillars and their curved tops without the need for chrome masks or photolithographic tools. The resulting OSTE micropillar arrays exhibit tunable top diameters (666–1151 µm) controlled by UV exposure time, and show hydrophobic surface properties (contact angles up to ∼135°). PDMS replica casting faithfully reproduces the Ω-shaped geometry, yielding smooth, biocompatible microwells potentially suitable for 3D cell culture. This method significantly reduces fabrication complexity, time, and cost, offering a practical and scalable route to curved microstructures for tissue engineering and organoid applications.

Förderung

  • National Natural Science Foundation of China
  • Guangdong Basic and Applied Basic Research Foundation
  • Department of Education of Guangdong Province
  • Bureau of Education of Foshan City
  • National Excellent Engineer Innovation Research Institute for Advanced Manufacturing Industry in Guangdong Hong Kong Macao Greater Bay Area
  • Guangdong Medical University
  • Shantou University

Zitieren

APA

Zhong, J., Li, H., Chen, X., Chen, H., Chen, D., Wu, G., Chu, L. T., & Guo, W. (2026). Fabrication of Omega-Shaped Microwells via OSTE Single-Step Lithography. Micromachines, 17(11), 1262. https://doi.org/10.3390/mi17111262

Vancouver

Zhong J, Li H, Chen X, Chen H, Chen D, Wu G, et al. Fabrication of Omega-Shaped Microwells via OSTE Single-Step Lithography. Micromachines. 2026;17(11):1262. doi:10.3390/mi17111262

BibTeX
@article{Zhong2026,
  author = {Zhong, Jiahua and Li, Haonan and Chen, Xinyi and Chen, Hao and Chen, Dinghui and Wu, Guanchong and Chu, Lok Ting and Guo, Weijin},
  title = {Fabrication of Omega-Shaped Microwells via OSTE Single-Step Lithography},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1262},
  doi = {10.3390/mi17111262}
}
Kostenlos starten →