EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication

Jingjing Xu iD, Michael Harasek iD, Margit Gföhler iD

Polymers · 09.02.2025 · 17 (4) · 455

DOI: 10.3390/polym17040455 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 09.02.2025. Verfasst von Jingjing Xu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Engineering Design and Product Development, Technische Universität Wien, 1060 Vienna, Austria. Die Arbeit wurde bisher 87-mal zitiert (Crossref) und nennt 122 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Horizon Europe, European Union’s Horizon Europe research and innovation program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The advent of 3D printing has revolutionized the fabrication of microfluidic devices, offering a compelling alternative to traditional soft lithography techniques. This review explores the potential of 3D printing, particularly photopolymerization techniques, fused deposition modeling, and material jetting, in advancing microfluidics. We analyze the advantages of 3D printing in terms of cost efficiency, geometric complexity, and material versatility while addressing key challenges such as material transparency and biocompatibility, which have represented the limiting factors for its widespread adoption. Recent developments in printing technologies and materials are highlighted, underscoring the progress in overcoming these barriers. Finally, we discuss future trends and opportunities, including advancements in printing resolution and speed, the development of new printable materials, process standardization, and the emergence of bioprinting for organ-on-a-chip applications. Sustainability and regulatory frameworks are also considered critical aspects shaping the future of 3D-printed microfluidics. By bridging the gap between traditional and emerging fabrication techniques, this review aims to illuminate the transformative potential of 3D printing in microfluidic device manufacturing.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingmicrofluidic engineeringsoft lithography

Autor:innen und Institutionen

  • Institute of Engineering Design and Product Development, Technische Universität Wien, 1060 Vienna, Austria.
  • Institute of Chemical, Environmental and Bioscience Engineering, Technische Universität Wien, 1060 Vienna, Austria.

ORCID-Profile: Jingjing Xu, Michael Harasek, Margit Gföhler

Förderung

  • European Union's Horizon Europe
  • European Union’s Horizon Europe research and innovation program

Zitieren

APA

Xu, J., Harasek, M., & Gföhler, M. (2025). From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication. Polymers, 17(4), 455. https://doi.org/10.3390/polym17040455

Vancouver

Xu J, Harasek M, Gföhler M. From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication. Polymers. 2025;17(4):455. doi:10.3390/polym17040455

BibTeX
@article{Xu2025,
  author = {Xu, Jingjing and Harasek, Michael and Gföhler, Margit},
  title = {From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {4},
  pages = {455},
  doi = {10.3390/polym17040455}
}
Kostenlos starten →