EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

UV Laser Micromachining of FR-4-Based Rigid–Flex PCBs: Predictive Modeling of Penetration Depth Through Design of Experiments

Giorgio Pellei iD, Paolo Di Stefano iD, Luca Mascalchi, Renzo Centi

Micromachines · 13.03.2026 · 17 (3) · 351

DOI: 10.3390/mi17030351 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 13.03.2026. Verfasst von Giorgio Pellei und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial and Computer Engineering and Economics, University of L'Aquila, 67100 L'Aquila, Italy. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Università degli Studi dell’Aquila.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study developed predictive mathematical models for UV laser penetration depth in FR-4-based rigid–flex printed circuit boards, addressing the critical need for precise material removal in applications like protective plug removal. Utilizing a comprehensive Design of Experiments framework, specifically two-level full factorial designs, the influence of key operational parameters—number of loops, scanning speed, and focal position offset—on material removal was systematically investigated in both laminate and multilayer substrates. Empirical models were established for both substrate types, identifying significant factors and interactions that govern penetration depth with physical justification. Comparative analysis revealed that the multilayer model consistently predicted deeper penetration (6–17 µm) than the laminate model under identical conditions, primarily due to reduced heat-associated phenomena with prepreg, yet the laminate model offered a reasonable approximation for complex stack-ups. Rigorous validation through confirmation experiments, achieving 100% success in electrical integrity tests with compliant plug removal, unequivocally demonstrated the models’ robustness and reliability. This research provided a crucial tool for optimizing UV laser micromachining processes, significantly reducing parameter identification times and minimizing scrap generation, thereby enhancing the efficiency and reliability of advanced rigid–flex PCB manufacturing.

Schlagwörter

Stichwörter der Autor:innen

FR-4UV laser micromachiningdesign of experimentsmaterial removalpenetration depthpredictive modelingprocess optimizationrigid–flex PCBs

Autor:innen und Institutionen

  • Department of Industrial and Computer Engineering and Economics, University of L'Aquila, 67100 L'Aquila, Italy.
  • Elco S.p.A., 67061 Carsoli, Italy.

ORCID-Profile: Giorgio Pellei, Paolo Di Stefano

Förderung

  • Università degli Studi dell’Aquila

Zitieren

APA

Pellei, G., Di Stefano, P., Mascalchi, L., & Centi, R. (2026). UV Laser Micromachining of FR-4-Based Rigid–Flex PCBs: Predictive Modeling of Penetration Depth Through Design of Experiments. Micromachines, 17(3), 351. https://doi.org/10.3390/mi17030351

Vancouver

Pellei G, Di Stefano P, Mascalchi L, Centi R. UV Laser Micromachining of FR-4-Based Rigid–Flex PCBs: Predictive Modeling of Penetration Depth Through Design of Experiments. Micromachines. 2026;17(3):351. doi:10.3390/mi17030351

BibTeX
@article{Pellei2026,
  author = {Pellei, Giorgio and Di Stefano, Paolo and Mascalchi, Luca and Centi, Renzo},
  title = {UV Laser Micromachining of FR-4-Based Rigid–Flex PCBs: Predictive Modeling of Penetration Depth Through Design of Experiments},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {3},
  pages = {351},
  doi = {10.3390/mi17030351}
}
Kostenlos starten →