EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CO2 Laser Micromachining of PTFE-Based PCBs: Predictive Modeling of Kerf Depth Through Design of Experiments

Giorgio Pellei iD, Paolo Di Stefano iD, Luca Mascalchi, Renzo Centi

Micromachines · 26.03.2026 · 17 (4) · 404

DOI: 10.3390/mi17040404 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 26.03.2026. Verfasst von Giorgio Pellei und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial and Computer Engineering and Economics, University of L'Aquila, 67100 L'Aquila, Italy. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of L'Aquila, Università degli Studi dell’Aquila.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The escalating demand for miniaturization in electronics necessitates advanced laser micromachining for precise micro-via fabrication in PTFE-based PCBs. This study addresses challenges in controlling CO2 laser kerf depth in PTFE, a material known for properties that complicate material removal. Employing a two-level full factorial Design of Experiments, the effects of number of loops, aperture, and pulse duration were systematically investigated. This analysis revealed that while pulse duration statistically impacted ablation depth, the number of loops was operationally most critical due to its direct proportionality with kerf depth in PTFE, leveraging its low thermal conductivity. Aperture, defining the laser spot size, was often constrained by PCB geometric specifications. The predictive models developed demonstrated robust generalizability across different PTFE-based laminates. Validation of the production of PCBs achieved a 100% success rate in meeting geometric tolerances and surface integrity. This DoE-based framework establishes a process window, significantly reducing parameter identification time and scrap, thereby enhancing manufacturing yield.

Schlagwörter

Stichwörter der Autor:innen

CO2 laser micromachiningDesign of ExperimentsPCBPTFEkerf depthpredictive modelprocess optimization

Autor:innen und Institutionen

  • Department of Industrial and Computer Engineering and Economics, University of L'Aquila, 67100 L'Aquila, Italy.
  • Elco S.p.A., 67061 Carsoli, Italy.

ORCID-Profile: Giorgio Pellei, Paolo Di Stefano

Förderung

  • University of L'Aquila
  • Università degli Studi dell’Aquila

Zitieren

APA

Pellei, G., Di Stefano, P., Mascalchi, L., & Centi, R. (2026). CO2 Laser Micromachining of PTFE-Based PCBs: Predictive Modeling of Kerf Depth Through Design of Experiments. Micromachines, 17(4), 404. https://doi.org/10.3390/mi17040404

Vancouver

Pellei G, Di Stefano P, Mascalchi L, Centi R. CO2 Laser Micromachining of PTFE-Based PCBs: Predictive Modeling of Kerf Depth Through Design of Experiments. Micromachines. 2026;17(4):404. doi:10.3390/mi17040404

BibTeX
@article{Pellei2026,
  author = {Pellei, Giorgio and Di Stefano, Paolo and Mascalchi, Luca and Centi, Renzo},
  title = {CO2 Laser Micromachining of PTFE-Based PCBs: Predictive Modeling of Kerf Depth Through Design of Experiments},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {4},
  pages = {404},
  doi = {10.3390/mi17040404}
}
Kostenlos starten →