Femtosecond Laser Percussion Drilling of Silicon Using Repetitive Single Pulse, MHz-, and GHz-Burst Regimes
Micromachines · 09.05.2024 · 15 (5) · 632
DOI: 10.3390/mi15050632 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 09.05.2024. Verfasst von Pierre Balage und 6 weiteren Autor:innen. Beteiligte Einrichtung: Université de Bordeaux-CNRS-CEA, CELIA UMR 5107, 33405 Talence, France. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNRS, CNRS Innovation.
Abstract (Originalsprache)
In this contribution, we present novel results on top-down drilling in silicon, the most important semiconductor material, focusing specifically on the influence of the laser parameters. We compare the holes obtained with repetitive single pulses, as well as in different MHz- and GHz-burst regimes. The deepest holes were obtained in GHz-burst mode, where we achieved holes of almost 1 mm depth and 35 µm diameter, which corresponds to an aspect ratio of 27, which is higher than the ones reported so far in the literature, to the best of our knowledge. In addition, we study the influence of the energy repartition within the burst in GHz-burst mode.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Université de Bordeaux-CNRS-CEA, CELIA UMR 5107, 33405 Talence, France.
- AMPLITUDE, Cité de la Photonique, 33600 Pessac, France.
- ALPhANOV, Rue François Mitterrand, 33400 Talence, France.
ORCID-Profile: Guillaume Bonamis, Inka Manek-Hönninger
Förderung
- CNRS
- CNRS Innovation
Zitieren
APA
Balage, P., Lafargue, M., Guilberteau, T., Bonamis, G., Hönninger, C., Lopez, J., & Manek-Hönninger, I. (2024). Femtosecond Laser Percussion Drilling of Silicon Using Repetitive Single Pulse, MHz-, and GHz-Burst Regimes. Micromachines, 15(5), 632. https://doi.org/10.3390/mi15050632
Vancouver
Balage P, Lafargue M, Guilberteau T, Bonamis G, Hönninger C, Lopez J, et al. Femtosecond Laser Percussion Drilling of Silicon Using Repetitive Single Pulse, MHz-, and GHz-Burst Regimes. Micromachines. 2024;15(5):632. doi:10.3390/mi15050632
BibTeX
@article{Balage2024,
author = {Balage, Pierre and Lafargue, Manon and Guilberteau, Théo and Bonamis, Guillaume and Hönninger, Clemens and Lopez, John and Manek-Hönninger, Inka},
title = {Femtosecond Laser Percussion Drilling of Silicon Using Repetitive Single Pulse, MHz-, and GHz-Burst Regimes},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {5},
pages = {632},
doi = {10.3390/mi15050632}
}
EUVIMED