EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Study of Percussion Drilling in Glasses with a Femtosecond Laser in Single Pulse, MHz-Burst, and GHz-Burst Regimes and Optimization of the Hole Aspect Ratio

Pierre Balage, Manon Lafargue, Théo Guilberteau iD, Guillaume Bonamis iD, Clemens Hönninger, John Lopez, Inka Manek-Hönninger iD

Micromachines · 07.09.2023 · 14 (9) · 1754

DOI: 10.3390/mi14091754 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 07.09.2023. Verfasst von Pierre Balage und 6 weiteren Autor:innen. Beteiligte Einrichtung: Université de Bordeaux-CNRS-CEA, CELIA UMR 5107, 33405 Talence, France. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNRS, CNRS Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this contribution, we present a comparative study on top-down drilling in sodalime glass, with a femtosecond laser operating in single-pulse, MHz-burst and GHz-burst modes, respectively. We investigate the hole depth, drilling rate, and hole morphology for these three regimes while keeping the same experimental conditions. We demonstrate that, for both burst regimes, the burst length has to be adapted for optimizing the hole depth. In the GHz-burst regime, the lower the ablation rate the longer the holes. The three drilling regimes lead to different hole morphologies, where the GHz-burst mode results in the best hole quality featuring glossy inner walls and an almost cylindrical morphology. Furthermore, we obtain crack-free holes, the deepest measuring 3.7 mm in length and 25 µm in entrance diameter corresponding to an aspect ratio of 150, which is the highest aspect ratio reported thus far with femtosecond GHz-burst drilling to the best of our knowledge.

Schlagwörter

Stichwörter der Autor:innen

femtosecond GHz-burstsglasseslaser–material interactionpercussion drillingultrafast laser processing

Autor:innen und Institutionen

  • Université de Bordeaux-CNRS-CEA, CELIA UMR 5107, 33405 Talence, France.
  • AMPLITUDE, Cité de la Photonique, 33600 Pessac, France.

ORCID-Profile: Théo Guilberteau, Guillaume Bonamis, Inka Manek-Hönninger

Förderung

  • CNRS
  • CNRS Innovation

Zitieren

APA

Balage, P., Lafargue, M., Guilberteau, T., Bonamis, G., Hönninger, C., Lopez, J., & Manek-Hönninger, I. (2023). Comparative Study of Percussion Drilling in Glasses with a Femtosecond Laser in Single Pulse, MHz-Burst, and GHz-Burst Regimes and Optimization of the Hole Aspect Ratio. Micromachines, 14(9), 1754. https://doi.org/10.3390/mi14091754

Vancouver

Balage P, Lafargue M, Guilberteau T, Bonamis G, Hönninger C, Lopez J, et al. Comparative Study of Percussion Drilling in Glasses with a Femtosecond Laser in Single Pulse, MHz-Burst, and GHz-Burst Regimes and Optimization of the Hole Aspect Ratio. Micromachines. 2023;14(9):1754. doi:10.3390/mi14091754

BibTeX
@article{Balage2023,
  author = {Balage, Pierre and Lafargue, Manon and Guilberteau, Théo and Bonamis, Guillaume and Hönninger, Clemens and Lopez, John and Manek-Hönninger, Inka},
  title = {Comparative Study of Percussion Drilling in Glasses with a Femtosecond Laser in Single Pulse, MHz-Burst, and GHz-Burst Regimes and Optimization of the Hole Aspect Ratio},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {9},
  pages = {1754},
  doi = {10.3390/mi14091754}
}
Kostenlos starten →