Design and Optimization of MEMS Resonant Pressure Sensors with Wide Range and High Sensitivity Based on BP and NSGA-II
Micromachines · 10.04.2024 · 15 (4) · 509
DOI: 10.3390/mi15040509 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 10.04.2024. Verfasst von Mingchen Lv und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Shandong University of Technology, Zibo 255000, China. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xuye Zhuang, Taishan Scholars Program of Shandong Province, Natural Science Foundation of Shandong Province, China.
Abstract (Originalsprache)
With the continuous progress of aerospace, military technology, and marine development, the MEMS resonance pressure sensor puts forward the requirements of not only a wide range but also high sensitivity. However, traditional resonators are hardly compatible with both. In response, we propose a new sensor structure. By arranging the resonant beam and the sensitive diaphragm vertically in space, the new structure improves the rigidity of the diaphragm without changing the thickness of the diaphragm and achieves the purpose of increasing the range without affecting the sensitivity. To find the optimal structural parameters for the sensor sensitivity and range, and to prevent the effects of modal disturbances, we propose a multi-objective optimization design scheme based on the BP and NSGA-II algorithms. The optimization of the structure parameters not only improved the sensitivity but also increased the interference frequency to solve the issue of mode interference. The optimized structure achieves a sensitivity and range of 4.23 Hz/kPa and 1–10 MPa, respectively. Its linear influence factor is 38.07, significantly higher than that of most resonant pressure sensors. The structural and algorithmic optimizations proposed in this paper provide a new method for designing resonant pressure sensors compatible with a wide range and high sensitivity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical Engineering, Shandong University of Technology, Zibo 255000, China.
Förderung
- Xuye Zhuang
- Taishan Scholars Program of Shandong Province
- Natural Science Foundation of Shandong Province, China
- Shandong Provincial Key Laboratory of Precision Manufacturing and Non-traditional Machining
Zitieren
APA
Lv, M., Li, P., Miao, J., Qiao, Q., Liang, R., Li, G., & Zhuang, X. (2024). Design and Optimization of MEMS Resonant Pressure Sensors with Wide Range and High Sensitivity Based on BP and NSGA-II. Micromachines, 15(4), 509. https://doi.org/10.3390/mi15040509
Vancouver
Lv M, Li P, Miao J, Qiao Q, Liang R, Li G, et al. Design and Optimization of MEMS Resonant Pressure Sensors with Wide Range and High Sensitivity Based on BP and NSGA-II. Micromachines. 2024;15(4):509. doi:10.3390/mi15040509
BibTeX
@article{Lv2024,
author = {Lv, Mingchen and Li, Pinghua and Miao, Jiaqi and Qiao, Qi and Liang, Ruimei and Li, Gaolin and Zhuang, Xuye},
title = {Design and Optimization of MEMS Resonant Pressure Sensors with Wide Range and High Sensitivity Based on BP and NSGA-II},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {4},
pages = {509},
doi = {10.3390/mi15040509}
}
EUVIMED