Design and Optimization of Hemispherical Resonators Based on PSO-BP and NSGA-II
Micromachines · 16.05.2023 · 14 (5) · 1054
DOI: 10.3390/mi14051054 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 16.05.2023. Verfasst von Jinghao Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Shandong University of Technology, Zibo 255000, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Taishan Scholars Program of Shandong Province, Key Research and Development Project of Zibo City under Grant, Natural Science Foundation of Shandong Province, China.
Abstract (Originalsprache)
Although one of the poster children of high-performance MEMS (Micro Electro Mechanical Systems) gyroscopes, the MEMS hemispherical resonator gyroscope (HRG) is faced with the barrier of technical and process limits, which makes it unable to form a resonator with the best structure. How to obtain the best resonator under specific technical and process limits is a significant topic for us. In this paper, the optimization of a MEMS polysilicon hemispherical resonator, designed by patterns based on PSO-BP and NSGA-II, was introduced. Firstly, the geometric parameters that significantly contribute to the performance of the resonator were determined via a thermoelastic model and process characteristics. Variety regulation between its performance parameters and geometric characteristics was discovered preliminarily using finite element simulation under a specified range. Then, the mapping between performance parameters and structure parameters was determined and stored in the BP neural network, which was optimized via PSO. Finally, the structure parameters in a specific numerical range corresponding to the best performance were obtained via the selection, heredity, and variation of NSGAII. Additionally, it was demonstrated using commercial finite element soft analysis that the output of the NSGAII, which corresponded to the Q factor of 42,454 and frequency difference of 8539, was a better structure for the resonator (generated by polysilicon under this process within a selected range) than the original. Instead of experimental processing, this study provides an effective and economical alternative for the design and optimization of high-performance HRGs under specific technical and process limits.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical Engineering, Shandong University of Technology, Zibo 255000, China.
Förderung
- Taishan Scholars Program of Shandong Province
- Key Research and Development Project of Zibo City under Grant
- Natural Science Foundation of Shandong Province, China
- Key Research and Development Project of Zibo City
Zitieren
APA
Liu, J., Li, P., Zhuang, X., Sheng, Y., Qiao, Q., Lv, M., Gao, Z., & Liao, J. (2023). Design and Optimization of Hemispherical Resonators Based on PSO-BP and NSGA-II. Micromachines, 14(5), 1054. https://doi.org/10.3390/mi14051054
Vancouver
Liu J, Li P, Zhuang X, Sheng Y, Qiao Q, Lv M, et al. Design and Optimization of Hemispherical Resonators Based on PSO-BP and NSGA-II. Micromachines. 2023;14(5):1054. doi:10.3390/mi14051054
BibTeX
@article{Liu2023,
author = {Liu, Jinghao and Li, Pinghua and Zhuang, Xuye and Sheng, Yunlong and Qiao, Qi and Lv, Mingchen and Gao, Zhongfeng and Liao, Jialuo},
title = {Design and Optimization of Hemispherical Resonators Based on PSO-BP and NSGA-II},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {5},
pages = {1054},
doi = {10.3390/mi14051054}
}
EUVIMED