EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

High-Power Femtosecond Laser Processing of SiC Ceramics with Optimized Material Removal Rate

Jian Zhang iD, Zhichao Liu, Yuanhang Zhang, Feng Geng, Shengfei Wang, Fei Fan, Qinghua Zhang, Qiao Xu

Micromachines · 2023-10-21 · 14 (10) · 1960

DOI: 10.3390/mi14101960 ↗

At a glance

Journal article in Micromachines, published online on 2023-10-21. Written by Jian Zhang and 7 co-authors. Institution: Laser Fusion Research Center, China Academy of Engineering Physics, Mianyang 621900, China. Cited 12 times so far (Crossref); 34 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China, Natural Science Foundation of Sichuan Province.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Silicon carbide (SiC) ceramics are widely used as structural materials for various applications. However, the extraordinarily high hardness, brittleness, low material removal rate, and severe tool wear of these materials significantly impact the performance of conventional mechanical processing techniques. In this study, we investigated the influence of different parameters on the material removal rate, surface quality, and surface oxidation during the laser processing of SiC ceramic samples using a high-repetition-frequency femtosecond laser at a wavelength of 1030 nm. Additionally, an experimental investigation was conducted to analyze the effects of a burst mode on the material removal rate. Our results demonstrate that the surface oxidation, which significantly affects the material removal rate, can be effectively reduced by increasing the laser scanning speed and decreasing the laser scanning pitch. The material removal rate and surface quality are mainly affected by laser fluence. The optimal material removal rate is obtained with a laser fluence of 0.4 J/cm2 at a pulse width of 470 fs.

Subjects

Author keywords

SiC ceramicsfemtosecond laserlaser processingmaterial removal ratesurface oxidation

Authors and institutions

  • Laser Fusion Research Center, China Academy of Engineering Physics, Mianyang 621900, China.

ORCID profiles: Jian Zhang

Funding

  • National Natural Science Foundation of China
  • Natural Science Foundation of Sichuan Province

Cite

APA

Zhang, J., Liu, Z., Zhang, Y., Geng, F., Wang, S., Fan, F., Zhang, Q., & Xu, Q. (2023). High-Power Femtosecond Laser Processing of SiC Ceramics with Optimized Material Removal Rate. Micromachines, 14(10), 1960. https://doi.org/10.3390/mi14101960

Vancouver

Zhang J, Liu Z, Zhang Y, Geng F, Wang S, Fan F, et al. High-Power Femtosecond Laser Processing of SiC Ceramics with Optimized Material Removal Rate. Micromachines. 2023;14(10):1960. doi:10.3390/mi14101960

BibTeX
@article{Zhang2023,
  author = {Zhang, Jian and Liu, Zhichao and Zhang, Yuanhang and Geng, Feng and Wang, Shengfei and Fan, Fei and Zhang, Qinghua and Xu, Qiao},
  title = {High-Power Femtosecond Laser Processing of SiC Ceramics with Optimized Material Removal Rate},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {10},
  pages = {1960},
  doi = {10.3390/mi14101960}
}
Start for free →